gearmotors

Articles About gearmotors


Articles are sorted by RELEVANCE. Sort by Date.

1 Taking Aim at Conveyor Systems (October 2016)

It's no secret that conveyor systems are the primary market for gearmotors, and so it shouldn't be much of a surprise that gearmotor manufacturers are looking for ways to cater to that market's needs. From Brother's new VFDs to Siemens' Simotics S-1FG1, a lot of the new solutions in the industry have their own unique quirks, but all fall into a few common veins.

2 Lightweight, Highly Efficient Drive System (February 2017)

This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.

3 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

4 Product News (September 2017)

The complete Product News section from the September 2017 issue of Power Transmission Engineering.

5 Familiar Goals, New Solutions (October 2017)

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)

6 Six Key Elements of Gearmotor Optimization (August 2017)

How to Ensure Reliable Performance, Increased Efficiency and Lowest Total Cost of Ownership.

7 Product News (September 2016)

News about recent products in the Industry

8 Energy Efficiency, Configurable Solutions Highlight Pack Expo (December 2014)

A wide variety of companies displayed mechanical power transmission and motion control technologies at Pack Expo, held in November in Chicago. The event, which is the largest packaging and processing trade show in North America, attracted more than 48,000 attendees, according to show owner and producer PMMI. The four-day event included 2,352 exhibiting companies, an increase of more than 19 percent from the previous show in 2012.

9 Direct Drive Technology and its Impact on the Gearmotor Business (December 2009)

An exploration of direct drive motor trends and examples of design uses for direct drives as replacements for gear drives or belt drives.

10 Packaging Stimulus (April 2009)

Few industries are experiencing change quite as fast as the packaging arena. Lighter-weight containers are being introduced to reduce costs and energy use, packaging is being redesigned to attract consumer attention and manufacturers are using fewer materials in an effort to address environmental concerns.

11 The Doomsday Clock is Ticking for Gearmotor Manufacturers (October 2015)

The secondhand on the Doomsday dial ominously spins around the face, slowly but ever so surely inching the motor industry towards its inevitable terminus:

12 Industry News (October 2015)

News From the gear Industry

13 Product News (August 2016)

News about industry products.

14 Development of the Upgraded DC Brush Gearmotor for Spacebus Platforms (April 2011)

The obsolescence of materials and processes in the manufacture of traditional DC brush gearmotors has necessitated the development of an upgraded DC brush gearmotor.

News Items About gearmotors

1 VWDIR Gearmotors Operate Under Heavy Duty Torque and Power (December 18, 2008)
Bison Gear's Von Weise Drop-In Replacement gearmotors offer up to 800 in-lbs of continuous torque output, making them suitable for e...

2 Emerson Unveils New Line of Gearmotors (January 2, 2008)
Emerson Power Transmission recently introduced two new additions to its product line. The HwN series 3000 helical worm gearmotors and ser...

3 Applimotion Offers Custom High Torque Gearmotors (November 5, 2012)
Applimotion introduces custom gearmotors for your high torque low speed and low profile applications. The assemblies combine precision ge...

4 Brother Gearmotors to Showcase Customer Benefits at WestPack (January 28, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

5 Brother Gearmotors Expands Selection of High Torque Mid-Series Gearmotors (March 12, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

6 Bodine's New Gearmotors Deliver Twice the Torque of Popular Motor/Gearhead Combinations (July 26, 2007)
Bodine Electric's CG gearmotor, an extra-rugged line of variable speed AC inverter-duty and permanent magnet DC gearmotors, was devel...

7 Gearmotors Built for High Torque Applications (June 6, 2007)
The AKM gearmotors set from Heason Technologies combines the torque density from the company's line of servomotors with its planetary...

8 New Gearmotors from Bison Gear (March 18, 2005)
The new parallel shaft AC gearmotors from Bison Gear & Engineering are available in five gear ratios ranging from 5.8:1 to 42.8:1. Th...

9 Bodine Introduces New Family of Gearmotors (April 19, 2005)
The family of gearmotors includes a Quinsulation five-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31. The i...

10 New Parallel Shaft Gearmotors from Sharq Motion Offer Backward Compatibility (March 5, 2007)
The new Sharq 207 series parallel shaft gearmotors, designed as direct drop-in replacements for many high volume OEM applications are the...

11 Source Engineering Introduces Planetary Gearmotors for OEM Applications (May 24, 2007)
Source Engineering introduced planetary brush and brushless gearmotors for OEM applications. Gearmotors are best suited to applications r...

12 Brother Gearmotors IE3 Gearmotors to be Introduced at Pack Expo (September 23, 2015)
Brother Gearmotors will introduce a line of IE3 premium efficiency gearmotors at Pack Expo Las Vegas, Sept. 28-30. The new IE3 premium e...

13 Brother Will Introduce ie3 Premium Efficiency Gearmotors at Pack Expo (August 7, 2015)
Brother Gearmotors recently announced it will introduce a line of ie3 premium efficiency gearmotors at Pack Expo Las Vegas, Sept. 28-30.T...

14 Bison Offers Integral HP Reducers and Gearmotors (July 20, 2016)
Bison now carries a full line of integral horsepower reducers and gearmotors that range in power from 1 - 5 hp. This new line of products...

15 Brother Gearmotors Partners with Dart Controls (December 5, 2017)
Brother Gearmotors, a division of Brother International Corporation offering a wide range of ultra-reliable, sub-fractional gearmotors an...

16 Brother Gearmotors Offers 3D CAD Drawings for 1-3 HP Motors (August 22, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

17 Brother Gearmotors Partners with American Control Electronics (October 4, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

18 Brother Gearmotors Introduces Expedited Delivery Service from Tennessee Manufacturing Facility (April 18, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

19 Brother Gearmotors Introduces Line of Right Angle Hypoid Gearing Brushless DC Gearmotors (July 26, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

20 Brother Gearmotors Upgrades Conduit Boxes for Easy Installation (June 28, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

21 Brother Gearmotors Hires Director of Sales (February 13, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

22 Nord Supplies Gearmotors for Solar Thermal Project (October 11, 2011)
Solar thermal installations built around a central tower have long been limited to mere tech demonstrations and R&D facilities, until...

23 Applied Mechatronics to Service Brother Gearmotors' California Customers (July 31, 2015)
Brother Gearmotors recently entered into an agreement with Applied Mechatronics. Applied Mechatronics will commence servicing much o...

24 Brother Gearmotors Announces New National Sales Director (February 8, 2018)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

25 Bison Gear PowerSTAR 712 Series Gearmotors Deliver Same Features in a New, Smaller Package (October 14, 2015)
Bison Gear and Engineering recently announced a new addition to the PowerSTAR right-angle hypoid gearmotor product line: the 712 series. ...

26 Brother Gearmotors to Launch Conveyor Series Product Line (February 12, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

27 Nord Gearmotors Offer Reliability for Rolling Mills (January 16, 2012)
In recent years, Nord Drivesystems has been very active in the steel industry in China and India. Nord has supplied 2,500 geared motors t...

28 Brother Gearmotors Launches New Website (April 8, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

29 Brother Gearmotors Hires Two New Regional Sales Managers (September 30, 2015)
Brother Gearmotors recently added two more regional sales managers: William (Bill) Miicke and Larry Thomas.  The sales managers are...