gearmotor

Articles About gearmotor


Articles are sorted by RELEVANCE. Sort by Date.

1 Development of the Upgraded DC Brush Gearmotor for Spacebus Platforms (April 2011)

The obsolescence of materials and processes in the manufacture of traditional DC brush gearmotors has necessitated the development of an upgraded DC brush gearmotor.

2 Taking Aim at Conveyor Systems (October 2016)

It's no secret that conveyor systems are the primary market for gearmotors, and so it shouldn't be much of a surprise that gearmotor manufacturers are looking for ways to cater to that market's needs. From Brother's new VFDs to Siemens' Simotics S-1FG1, a lot of the new solutions in the industry have their own unique quirks, but all fall into a few common veins.

3 Six Key Elements of Gearmotor Optimization (August 2017)

How to Ensure Reliable Performance, Increased Efficiency and Lowest Total Cost of Ownership.

4 The Doomsday Clock is Ticking for Gearmotor Manufacturers (October 2015)

The secondhand on the Doomsday dial ominously spins around the face, slowly but ever so surely inching the motor industry towards its inevitable terminus:

5 Airport Baggage Handling: Queue Conveyor Design from a Gearmotor Perspective (February 2011)

The primary driver of an airport baggage handling queue conveyor must be able to operate under increasingly demanding operating conditions, including frequent starting and stopping. The selection of the primary driver of the queue conveyor is dependent on multiple criteria, including dimensional requirements and durability characteristics.

6 Direct Drive Technology and its Impact on the Gearmotor Business (December 2009)

An exploration of direct drive motor trends and examples of design uses for direct drives as replacements for gear drives or belt drives.

7 Product News (September 2017)

The complete Product News section from the September 2017 issue of Power Transmission Engineering.

8 Familiar Goals, New Solutions (October 2017)

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)

9 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

10 Efficiency of Design (February 2018)

Energy efficiency is for more than just motors. Here are some mechatronics companies making sure you get more bang for your buck when it comes to your power bill.

11 Industry News (March 2018)

The complete Industry News section from the March 2018 issue of Power Transmission Engineering.

12 Product News (September 2016)

News about recent products in the Industry

13 Energy Efficiency, Configurable Solutions Highlight Pack Expo (December 2014)

A wide variety of companies displayed mechanical power transmission and motion control technologies at Pack Expo, held in November in Chicago. The event, which is the largest packaging and processing trade show in North America, attracted more than 48,000 attendees, according to show owner and producer PMMI. The four-day event included 2,352 exhibiting companies, an increase of more than 19 percent from the previous show in 2012.

14 Industry News (October 2015)

News From the gear Industry

15 Product News (August 2016)

News about industry products.

16 Packaging Stimulus (April 2009)

Few industries are experiencing change quite as fast as the packaging arena. Lighter-weight containers are being introduced to reduce costs and energy use, packaging is being redesigned to attract consumer attention and manufacturers are using fewer materials in an effort to address environmental concerns.

17 Lightweight, Highly Efficient Drive System (February 2017)

This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.

News Items About gearmotor

1 Bodine's New Gearmotors Deliver Twice the Torque of Popular Motor/Gearhead Combinations (July 26, 2007)
Bodine Electric's CG gearmotor, an extra-rugged line of variable speed AC inverter-duty and permanent magnet DC gearmotors, was devel...

2 Gearmotor Line Boasts More Than 75 Standard Models (August 28, 2008)
Bison Gear and Engineering Corp. has responded to growing OEM customer demand with more than 75 standard gearmotor models designed as V...

3 Emerson Unveils New Line of Gearmotors (January 2, 2008)
Emerson Power Transmission recently introduced two new additions to its product line. The HwN series 3000 helical worm gearmotors and ser...

4 VWDIR Gearmotors Operate Under Heavy Duty Torque and Power (December 18, 2008)
Bison Gear's Von Weise Drop-In Replacement gearmotors offer up to 800 in-lbs of continuous torque output, making them suitable for e...

5 Dunkermotor Releases Wormetary Gearmotor Configuration (July 19, 2012)
To meet the needs of OEMs requiring a high torque, low output speed non-backdrivable gearmotor without sacrificing energy efficiency, Dun...

6 Brother Gearmotors to Showcase Customer Benefits at WestPack (January 28, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

7 Applimotion Offers Custom High Torque Gearmotors (November 5, 2012)
Applimotion introduces custom gearmotors for your high torque low speed and low profile applications. The assemblies combine precision ge...

8 Maxon Modifies EC16 Gearmotor (June 27, 2011)
Maxon's EC16 brushless DC servo gearmotor has had a number of modifications and improvements. The most obvious changes are ...

9 Gearmotors Built for High Torque Applications (June 6, 2007)
The AKM gearmotors set from Heason Technologies combines the torque density from the company's line of servomotors with its planetary...

10 New Gearmotors from Bison Gear (March 18, 2005)
The new parallel shaft AC gearmotors from Bison Gear & Engineering are available in five gear ratios ranging from 5.8:1 to 42.8:1. Th...

11 New DC Gearmotor from Midwest Motion (January 6, 2005)
A new DC gearmotor, Model No. MMP.TM55-24V.GP52-100.1 can accept any 24 volt source, including battery power. According to the compan...

12 Bodine Introduces New Family of Gearmotors (April 19, 2005)
The family of gearmotors includes a Quinsulation five-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31. The i...

13 Bison Gear’s Hollow Shaft Gearmotor Doubles Continuous Torque Ratings (March 10, 2006)
Bison Gear’s new 562 series hollow shaft gearmotor offers increased low speed center distance coupled with greater clearance for wid...

14 Source Engineering Introduces Planetary Gearmotors for OEM Applications (May 24, 2007)
Source Engineering introduced planetary brush and brushless gearmotors for OEM applications. Gearmotors are best suited to applications r...

15 New Parallel Shaft Gearmotors from Sharq Motion Offer Backward Compatibility (March 5, 2007)
The new Sharq 207 series parallel shaft gearmotors, designed as direct drop-in replacements for many high volume OEM applications are the...

16 Brother Gearmotors Expands Selection of High Torque Mid-Series Gearmotors (March 12, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

17 Bodine Expands Gearmotor Line (January 24, 2014)
Bodine Electric Company announced that it has expanded its popular FX line of parallel shaft gearmotors to include AC models.The all-new ...

18 Bison Gear PowerSTAR 712 Series Gearmotors Deliver Same Features in a New, Smaller Package (October 14, 2015)
Bison Gear and Engineering recently announced a new addition to the PowerSTAR right-angle hypoid gearmotor product line: the 712 series. ...

19 Brother Gearmotors Partners with Dart Controls (December 5, 2017)
Brother Gearmotors, a division of Brother International Corporation offering a wide range of ultra-reliable, sub-fractional gearmotors an...

20 Brevini Expands Gearmotor Capabilities (February 5, 2016)
Power transmission specialist, Brevini, has launched a new range of gearmotors, which will expand its capabilities within small to medium...

21 Bison Offers Integral HP Reducers and Gearmotors (July 20, 2016)
Bison now carries a full line of integral horsepower reducers and gearmotors that range in power from 1 - 5 hp. This new line of products...

22 Brother Will Introduce ie3 Premium Efficiency Gearmotors at Pack Expo (August 7, 2015)
Brother Gearmotors recently announced it will introduce a line of ie3 premium efficiency gearmotors at Pack Expo Las Vegas, Sept. 28-30.T...

23 Brother Gearmotors IE3 Gearmotors to be Introduced at Pack Expo (September 23, 2015)
Brother Gearmotors will introduce a line of IE3 premium efficiency gearmotors at Pack Expo Las Vegas, Sept. 28-30. The new IE3 premium e...

24 Brother Gearmotors Hires Director of Sales (February 13, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

25 Brother Gearmotors Partners with American Control Electronics (October 4, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

26 Brother Gearmotors Introduces Expedited Delivery Service from Tennessee Manufacturing Facility (April 18, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

27 Midwest Motion Releases New Gearmotor (March 15, 2007)
Midwest Motion Products announced the release of a new DC Gear Motor, the Model No. MMP-TM55-90-12V GPk52-124. Accepting any 12 Volt D...

28 Falk Creates New Right Angle Gearmotor (April 13, 2005)
A new line of stainless steel helical bevel gear drives from Falk is recommended for food industry sanitation requirements. These drives ...

29 Brother Gearmotors Announces New National Sales Director (February 8, 2018)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

30 New Gearmotor from Midwest Motion (February 3, 2005)
The new MMP-TM55-36V-007 DC gear motor from Midwest Motion Products can accept any 36-volt DC source, including batteries. According t...

31 Brother Gearmotors Offers 3D CAD Drawings for 1-3 HP Motors (August 22, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

32 Brother Gearmotors Introduces Line of Right Angle Hypoid Gearing Brushless DC Gearmotors (July 26, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

33 Brother Gearmotors Launches New Website (April 8, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

34 Nord Gearmotors Offer Reliability for Rolling Mills (January 16, 2012)
In recent years, Nord Drivesystems has been very active in the steel industry in China and India. Nord has supplied 2,500 geared motors t...

35 Brother Gearmotors Hires Two New Regional Sales Managers (September 30, 2015)
Brother Gearmotors recently added two more regional sales managers: William (Bill) Miicke and Larry Thomas.  The sales managers are...

36 Brother IPMax Gearmotors Offer Compact, Lightweight Option (May 22, 2018)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearm...

37 Nord Supplies Gearmotors for Solar Thermal Project (October 11, 2011)
Solar thermal installations built around a central tower have long been limited to mere tech demonstrations and R&D facilities, until...

38 DC Gearmotor Offers Compact Solution (April 8, 2011)
Crouzet North America has introduced the 801 Series Brushless DC Gearmotor with integrated gearbox and electronics. The new all-in-one so...

39 Applied Mechatronics to Service Brother Gearmotors' California Customers (July 31, 2015)
Brother Gearmotors recently entered into an agreement with Applied Mechatronics. Applied Mechatronics will commence servicing much o...

40 Brother Gearmotors to Launch Conveyor Series Product Line (February 12, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

41 Habasit Appoints President of Gearmotor Division (April 15, 2010)
George Rizza joins Habasit America as president of the Gearmotor Division. Rizza previously served as vice president of sales at Nord Gea...

42 Brother Gearmotors Upgrades Conduit Boxes for Easy Installation (June 28, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...