belts

Articles About belts


Articles are sorted by RELEVANCE. Sort by Date.

1 Belts Vs. Couplings (August 2015)

rotary-type blowers? Examples: for motor KW; RPM; temperature; pressure production; lifetime; etc. In other words, how do I choose between belts or couplings?

2 Timing Belts and Pulleys - Operations (December 2016)

Synchronous drives are especially well-suited for low-speed, high-torque applications. Their positive driving nature prevents potential slippage associated with V-belt drives, and even allows significantly greater torque carrying capability. Small pitch synchronous drives operating at speeds of 50 ft/min (0.25 m/s) or less are considered to be low-speed. Care should be taken in the drive selection process as stall and peak torques can sometimes be very high. While intermittent peak torques can often be carried by synchronous drives without special considerations, high cyclic peak torque loading should be carefully reviewed.

3 Guide to Selecting and Replacing Synchronous Belts (June 2016)

Just as we now consider rotary dial phones archaic, so are many installed synchronous belt drives. That they continue to operate is testimony to their durability. But that should not prevent you from taking advantage of newer synchronous belt drive technology that can improve both equipment design and field installations.

4 Analyzing Synchronous Belt Failure (October 2009)

If you’re replacing your belts more than once per year, it’s time to analyze your drive. From belt crimping damage to high belt installation tension to sprocket misalignment and adverse environmental conditions, this guide walks you through how to identify the reasons behind premature failure and makes recommendations on corrective and preventive measures.

5 Guide to V-Belt Selection and Replacement (June 2017)

V-belts look like relatively benign and simple pieces of equipment. They're basically a glorified rubber band, right? Need a replacement? Just measure the top width and circumference, find another belt with the same dimensions, and slap it on the drive. There's only one problem: that approach is about as wrong as you can get.

6 Total System Efficiency (February 2010)

Much of the industrial energy being consumed by systems is wasted through inefficiency. For this article, a system will be defined as the following components working together: electrical input power, variable frequency drives, induction motors, gearboxes and transmission elements (chains, belts, etc.).

7 Hovercraft Technology Taking Us Back to the Future (December 2015)

There are few things in this world that elicit such a gleeful, childlike sense of wonder as does the word “hoverboard”.

8 The Automated Parking Garage (September 2014)

ContiTech and Wöhr Team up for Unique Residential Solution.

9 Chains and Belts Play to Their Strengths (December 2015)

As with just about everything else in the manufacturing world — and all which that universe entails — it depends. After all, that’s why the art of manufacturing is a process — not a one-system-fits-all discipline. Yes, once that process has been properly designed and correctly implemented for a given manufacturing production need, it may well run like the astest, smoothest cookie-cutter-type operation ever devised.

10 Linear Motors (October 2016)

When the need arises for linear motion or positioning, there are many choices. One can use an Acme screw, ball screw, rack & pinion, or belts. The cost of a linear motor solution is generally greater than a mechanical linear product, but when one needs highly accurate, repeatable, high-speed motion, then the answer may be a linear motor.

News Items About belts

1 BrecoFlex Introduces Silicone Flat Belts for Positioning and Conveying PCV Cards with Card Printing and Card Reading Devices (April 21, 2006)
BRECOflex CO., L.L.C. offers seamless ESBAND? flat belts with and without carcass. Customized belts can be designed for individual applic...

2 Timing Belts, Fiberglass Reinforced Neoprene (July 10, 2007)
The Econobelt Line features timing belts in 11 different profiles. Made from fiberglass reinforced Neoprene, these belts are available in...

3 Stock Drive Introduces PowerGrip TruMotion Timing Belts (January 4, 2008)
Stock Drive Products/Sterling Instrument recently unveiled timing belts for clean running performance. The PowerGrip TruMotion timing bel...

4 AutomationDirect Adds Small Timing Belts and Pulleys (October 28, 2016)
AutomationDirect’s SureMotion line of motion control products now includes additional synchronous timing belts and pulleys for smal...

5 Replacement belts-timing, English Pitch from SDP/SI (May 30, 2007)
SDP/SI is an ISO 9001 manufacturer of over 4,929 timing belts. The company is able to modify standard catalog parts to customer specs ...

6 Fenner Link-Belts Designed to Replace Rubber V-Belts (October 13, 2014)
Fenner Drive has announced the launch of two new belt profiles - 3V and 5V narrow wedge belts. These 3V and 5V narrow wedge profiles are ...

7 Continental Introduces Synchrochain Carbon Belts at PTDA Industry Summit (October 24, 2016)
Continental recently introduced Conti Synchrochain Carbon power transmission belts for a variety of applications and industries at the Po...

8 New Line of Timing Belts and Pulleys from BRECOflex (February 26, 2005)
The ARC Power Plus line of timing belts and pulleys from BRECOflex are available as open-ended, spliced and welded endess and truly endle...

9 Seamless Flat Belts from BRECOflex (January 12, 2006)
BRECO flex CO., L.L.C. offers a large variety of seamless ESBAND® flat belts...

10 Standard Plus Belts from BRECOflex Offer Optimized Length Tolerance and Running Performance (January 12, 2006)
BRECOflex CO., L.L.C., presents the new STANDARD PLUS TECHNOLOGY. Standard Plus is the new generation of BRECOFLEX Truly Endless timin...

11 Fairloc Timing Belts, Timing Belt Pulleys from SDP/SI (May 30, 2007)
FairlocŪ is designed to solve phasing, timing, positioning and frequent removal problems which conventional fastening methods, such as cl...

12 Stock Drive Products/Sterling Instrument Unveils Self-Guiding Belts (January 2, 2008)
A series of self-guiding Conidrive timing belt drives from Stock Drive Products features the N10 belt and pulley system. These 10 mm pitc...

13 Fenner Drives Introduces 3V and 5V Wedge Link Belts (July 26, 2016)
Combining excellent service and long life with exceptional inventory control, the new Wedge Link Belting from Fenner Drives yield major a...

14 Timken Acquires Carlstar Belts Business (September 1, 2015)
The Timken Company recently announced that it has completed the previously announced transaction with American Industrial Partners to acq...

15 Molded Notch V-Belts Constructed of EPDM (July 13, 2010)
Gates Corporation is now using Ethylene Propylene Diene Monomer (EPDM) to construct its molded notch V-belt line. EPDM is a high performa...

16 Replacement Timing Belts-Metric Pitch (May 30, 2007)
SDP/SI is an ISO 9001 manufacturer of over 4,929 Timing Belts SDP/SI can modify standard catalog parts to various specs or produce com...