Tension Brakes

Articles About Tension Brakes


Articles are sorted by RELEVANCE. Sort by Date.

1 Controlling Backlash in Mammography Systems (April 2017)

Medical imaging equipment, water handling systems, conveyors, robotic systems and rotary and linear actuators are among the many devices that may be fitted with electric friction brakes to hold their loads in place when the power is off or disrupted.

2 Lightweight, Highly Efficient Drive System (February 2017)

This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.

3 The Search for Intelligent Brakes (Fall 2007)

Th e Allen Telescope Array at Hat Creek, CA is a joint venture between the University of California Berkeley and the SETI Institute of Mountain View, CA. SETI has hired Minex Engineering of Antioch, CA to help with the design and installation of state-of-the-art drives and controls for the antenna array.

4 Force Control Assists in Helicopter Transmission Overhaul (December 2017)

Oil shear brake technology is the key to quick and reliable test stand development.

5 Industry News (March 2018)

The complete Industry News section from the March 2018 issue of Power Transmission Engineering.

6 Planning Ahead (April 2019)

Navigating Clutch/Brake Operation in Harsh Environmental Conditions: Chemicals, saltwater, food particles, heat, dust, and electrical corrosion are just a few of the many issues that can cause clutches and brakes to fail prematurely.

7 Keeping Production Running (April 2019)

Cement Backer Board Plant Utilizes Oil Shear Clutch Brake

8 Making the Smart Choice in PT Components (April 2018)

The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.

9 Space Shuttle Rudder-Speed Brake Actuator (October 2015)

The U.S. Space Shuttle fleet was originally intended to have a life of 100 flights for each vehicle, lasting over a 10-year period, with minimal scheduled maintenance or inspection. The first space shuttle flight was that of the Space Shuttle Columbia (OV-102), launched April 12, 1981. The disaster that destroyed Columbia occurred on its 28th flight, February 1, 2003, nearly 22 years after its first launch.

10 Braking the Cycle (August 2015)

Tucked away in the southwest quadrant of the state of Georgia, amid stately pine stands, pecan farms and cotton fields, sits Oak Crest Lumber.

11 Soft Drink Solutions (December 2009)

Servo system from Bosch-Rexroth helps create more efficient beverage palletizer.

12 Improperly Testing Belt Tension Can Easily Damage Small Motors (February 2019)

Most of us want to just instinctively squeeze a belt between a pair of pulleys to test the belt tension. What is not as instinctive is just how much force such a procedure can put on the shaft -- often significantly past the manufacturer's rated limits for small motors. This can cause damage to both the shaft and the bearings.

13 Gear Materials (April 2017)

A reader wants to know how to figure out the fatigues strength, tooth root tension and other technical values of new, high-performance gear materials.

14 (Material) Moving into the Future (June 2011)

a custom hydraulic brake system from Mico Inc. aid in the development of specialized material handling equipment.

15 Blocks (Around the Clock) (August 2011)

Reading Rock manufactures concrete blocks - the kind that were probably used to build the schools that you attended. With employees working three shifts six to seven days a week, they make plenty of them.

16 No Time to Kill for Barge Operation (August 2014)

The scene is serene and picturesque. Sunshine reflects off the light chop of the Ohio River, as a barge winds its way into view. While those driving along Louisville’s River Road may be inclined to reach for a camera to capture this idyllic scene, the mood at Nugent Sand Company is anything but tranquil.

17 Industry News (December 2013)

The complete Industry News section from the December 2013 issue of Power Transmission Engineering.

18 Braking Toward the Future (August 2012)

In the past decade, electrohydraulic braking systems--including ABS and traction control--have grown increasingly popular, due largely to the vehicle design flexibility and performance advantages they offer. The industry has seen several other instances of intelligent machine controls, unrelated to braking, over the years as well. But what all of these technologies have typically had in common is that they’ve existed as standalone, point-to-point functions that have not been integrated together. The present and future of braking is all about taking the next logical step--getting fully connected and finding ways to embed intelligence throughout a machine.

19 Designing Drive Systems for Low-Web-Speed Applications (December 2012)

This paper will look at the solutions that current drive and motor technology can offer in not only improving tension control but also solving several other issues that are inherent to systems with high ratio gearing.