Shaft Mounted Speed Reducers

Articles About Shaft Mounted Speed Reducers


Articles are sorted by RELEVANCE. Sort by Date.

1 Torque Arm Design Considerations for Shaft-Mounted Speed Reducers (April 2008)

Most manufacturers of shaft-mounted speed reducers offer torque arms for their products. However, in some situations, a machine designer may be required to design his own.

2 The Fundamentals of Specifying and Selecting Gear Drives (December 2012)

Gear drives deliver power to industrial equipment such as bulk material conveyors, mixers, pumps and paper mills. The reliability that translates into greater uptime and profitability begins by specifying and selecting the proper drives for these critical applications.

3 Musical Gearboxes (October 2013)

Dave Soma, the mechanical supervisor at Leland Olds Station, a coal-fired power plant near Stanton, North Dakota, says he and his maintenance team care deeply about keeping the plant running and providing people electricity, especially in the dead of winter.

4 Stable and Streamlined (September 2018)

Gear drives focus on longevity, quality and customization.

5 Study of Multiple-Point Oil-Jet Lubrication of High-Speed Ball Bearings (June 2014)

The air-oil, two-phase flow inside the multiple-point, oil-jet lubrication ball bearing was studied based on CFD (computational fluid dynamics) theory and technique, and compared with single-point, oil-jet lubrication. The results indicate that the air-oil distribution inside the bearing with multiple-point, oil-jet lubrication is more uniform than single-point injection.

6 Designing Drive Systems for Low-Web-Speed Applications (December 2012)

This paper will look at the solutions that current drive and motor technology can offer in not only improving tension control but also solving several other issues that are inherent to systems with high ratio gearing.

7 The Workhorse of Industry: The Induction Motor (December 2013)

A brief overview of the induction motor, including the basics of construction, performance and variable speed drives.

8 Variable Speed Pump Drives For Industrial Machinery - System Considerations (February 2015)

The changing landscape of hydraulic drives is leading many fluid power specialists to quickly adapt to using variable speed pump drives. Optimum utilization of these drives requires, in many cases, additional system design considerations.

9 Better Energy-Efficient Flow Rate Regulation (December 2016)

Implementing a power-on-demand concept based on variable speed drives allows for energy saving in any application that involves pumps or hydraulic systems. And when used in combination with an intelligent wiring and communication system, relevant machine data can also be easily recorded - the basis for comprehensive power management.

10 Monitoring the Health of Plant Machinery (September 2018)

Health monitoring or condition monitoring has been used for many years on machines and in plants where the cost of an outage is high. It allows failures to be anticipated and maintenance or repairs to be scheduled for the least loss of production, as well as avoiding unnecessary periodic maintenance.

11 Baldor Basics: Understanding Torque (April 2017)

In the process of applying industrial drive products, we occasionally are misled into believing that we are applying horsepower. The real driving force is not horsepower - it is torque. This paper is developed to impart a deeper understanding of torque, its relationship to horsepower, and the types of loads we most frequently encounter.

12 Baldor Basics: Motors (February 2017)

This issue we cover frame sizes and two-speed motors in our continuing series of articles, courtesy of Baldor Electric, dedicated to motor basics.

13 Minimum Design Speed Considerations for Sleevoil Bearings for Industrial Fan Applications (September 2016)

Slow speed operation of fan systems within the air handling industry is generally performed due to two reasons: a coast down operation is required for hot (induced draft) fans to cool down before shutdown (often by using a turning gear), and operational efficiency improvements can be achieved during non-peak periods by slow speed operation using a VFD. In either case, when these fans are supported by hydrodynamic bearings, it is the oil film thickness developed from the bearing-shaft interaction that limits the minimum speed that can be maintained without causing premature wear and bearing failure. This paper will present a brief overview of lubrication theory and critical design parameters to achieve slow speed operation.

14 Rolling Bearings in High-Speed Passenger Traffic (June 2012)

Passenger transport today moves significantly faster than ever before, often operating on separate tracks especially designed for high-speed trains. Accordingly, high-speed rolling bearings are very important components in the bogies of trains today. Maximum train speeds currently reach 380 km/h (236 mph) in the latest high-speed applications - 80% higher than in the earlier days of high-speed traffic. This paper presents two application examples of modern, high-speed traffic, together with some typical bearing arrangements and housings. It provides insight regarding measures taken in the bearing industry to meet the requirements of contemporary, high-speed traffic, and it cites important standards and regulations applicable for - but not restricted to - European applications. To be precise, the focus here is on journal bearings; information on traction motor bearings, transmission bearings and housings is included, but described in less detail.

15 Reducing Food Processing Plant Energy Costs (February 2016)

U.S. manufacturers, such as food processors, face an unprecedented competitive environment and must look for ways to be profitable without negatively affecting the quality of finished products.

16 Bearing Protection Needed if Inverter-Duty Motors Are to Live up to their Name (August 2012)

All major manufacturers of 3-phase AC induction motors offer "inverter-duty" or "inverter-ready” models, but while these motors have inverter-rated insulation to protect the windings, the bearings--their most vulnerable parts--are too often ignored.

17 University Improves Sustainability of HVAC Motors in Platinum LEED Building (April 2012)

A new preventive maintenance program at a leading New England Ivy League university demonstrates how the push for more sustainable "green" building management has led to a growing awareness of a chronic, widespread problem with HVAC motors—electrical bearing damage and failure.

18 Sky Science (April 2012)

S.S. White Provides Twisting, Turning Power Transmission with Flexible Shafts

19 How to Prevent Pulley Slippage (February 2017)

I'm not able to get a good connection between the pulley and shaft in my drive assembly. Could you explain the various ways of connecting a pulley to a shaft to prevent the pulley from slipping?

20 The Science of Radial Shaft Seals (April 2017)

SKF Product Investigation Center Troubleshoots Critical Rotating Equipment Applications with Analysis, Research and Testing Procedures.

21 Motoring Ahead (August 2011)

Synchronous motors controlled by variable speed drives are bringing higher efficiencies to industrial applications.

22 Rain or Shine (April 2008)

Brevini Power Transmission helps spectators enjoy stadium sights and sounds.

23 Should You Pay a Premium for a Mounted Ball Bearing (December 2013)

Mounted ball bearings are everywhere in industrial applications. They serve critical roles in keeping a manufacturing operation running smoothly and in ensuring that equipment functions properly and reliably. So why might it be advisable to spend significantly more for a dimensionally comparable bearing from one supplier versus another?

24 Understanding the Dynamic Influences of Gear Oils and Radial Shaft Seals (February 2018)

Sustainability is becoming one of the most important aspects within the power transmission business. Users demand low-maintenance drive systems with as little disruption as possible, and expect lifetimes of more than 10,000 hours. Approximately 40 percent of long-term gearbox leakages can be traced back to poor interaction between the radial shaft seal (RSS) and the lubricant. Thus, it becomes essential to analyze the tribological system as a whole, which includes the gear oil, seal grease (if required), elastomer material and design, and the shaft.

25 Flexible Options with Flexible Shafts (August 2013)

You need to transmit a rotary motion where no straight line is possible. Or, you need to allow for some uncontrollable misalignment. How about transmission taking place between moving components? What if you need to control something in hazardous locations where you cannot directly handle the application, such as high-temperature environments, under hazardous conditions or in clean room applications? Functionally designed flexible shafts can meet all these challenges.