Ohio Electric

Articles About Ohio Electric


Articles are sorted by RELEVANCE. Sort by Date.

1 Industry News (August 2014)

The complete Industry News section from the August 2014 issue of Power Transmission Engineering.

2 DC Motor Protection (June 2013)

The purpose of DC motor protection is to extend a motor's lifespan by protecting it from conditions that can damage the motor's windings--both electrically and mechanically.

3 Reducing Food Processing Plant Energy Costs (February 2016)

U.S. manufacturers, such as food processors, face an unprecedented competitive environment and must look for ways to be profitable without negatively affecting the quality of finished products.

4 Product News (Spring 2007)

News about upcomming products

5 IMTS 2016 Booth Preview (August 2016)

A nose-in-the-tent peek at the booths featuring mechanical motion components.

6 Industry News (December 2015)

News from around the industry

7 Product News (June 2015)

News about latest Products in the Industry

8 Electric Vehicles Need Quieter Gears (October 2014)

For Mark Findlay of UK specialist driveline consultancy Drive System Design, reducing gear noise to suit the low noise levels in an electric vehicle cabin has meant throwing away the rule book.

9 Chariots to Steamboats to E-Fans (October 2014)

Heaven help Mr. Deane were he around today. In our non-stop world of transportation & transport technology, for at least the past decade it is without question the electric car that has drawn most of the attention

10 Mining for Solutions (September 2016)

Increasing pressure on many fronts is compelling mine operators to thoroughly examine every phase of their operations. Fluctuating demand that whipsaws mineral prices, government-imposed environmental regulations and rising operating costs related to maintenance downtime all pose serious challenges for the mining sector. Add pressure from customers and stakeholders for more sustainable operations as well as union demands for higher wages, and you have a scenario that requires mine operators to exercise every possible option to achieve more efficient operations.

11 When it Comes to Mining, Bigger is Best (June 2015)

One of the key challenges in the mining industry today is maintaining throughput in the face of ore grade quality that has declined by 40 percent in the last decade.

12 Minimum Design Speed Considerations for Sleevoil Bearings for Industrial Fan Applications (September 2016)

Slow speed operation of fan systems within the air handling industry is generally performed due to two reasons: a coast down operation is required for hot (induced draft) fans to cool down before shutdown (often by using a turning gear), and operational efficiency improvements can be achieved during non-peak periods by slow speed operation using a VFD. In either case, when these fans are supported by hydrodynamic bearings, it is the oil film thickness developed from the bearing-shaft interaction that limits the minimum speed that can be maintained without causing premature wear and bearing failure. This paper will present a brief overview of lubrication theory and critical design parameters to achieve slow speed operation.

13 Baldor Motor Basics: Factors that Determine Industrial Electric Bills (August 2017)

A good deal of confusion exists regarding the factors that determine an industrial electric bill. The following information is presented to help sort out the various items on which billing is based, and to offer suggestions on measures to help control and reduce electric utility bills.

14 Built for Speed (March 2018)

Japan's Electric Aspark Owl Does 0-to-60 MPH in 1.9 Seconds!

15 Making the Smart Choice in PT Components (April 2018)

The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.

16 Product News (March 2017)

The complete Product News section from the March 2017 issue of Power Transmission Engineering.

17 Lightweight, Highly Efficient Drive System (February 2017)

This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.

18 Product News (December 2016)

News about the most recent products to hit the market.

19 Industry News (December 2016)

News from around the industry.

20 Changing Technologies, Changing Perspectives (February 2017)

A Conversation with Jeff Hemphill, CTO at Schaeffler Group USA Inc about mechatronic solutions and the electric vehicles of tomorrow.

21 Product News (October 2014)

News about new Products in the industry.

22 Product News (August 2014)

The complete Product News section from the August 2014 issue of Power Transmission Engineering

23 Product News (August 2008)

The complete product news section from the August 2008 issue of Power Transmission Engineering.

24 Product News (December 2008)

The complete product news section from the December 2008 issue of Power Transmission Engineering.

25 Product News (April 2009)

The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.

26 Product News (June 2008)

The complete product news section from the June 2008 issue of Power Transmission Engineering.

27 Product News (April 2008)

The complete product news section from the April 2008 issue of Power Transmission Engineering.

28 Industry News (October 2015)

News From the gear Industry

29 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

30 Product News (February 2009)

The complete Product News section from the February 2009 issue of Power Transmission Engineering.

31 Product News (December 2009)

The complete Product News section from the December 2009 issue of Power Transmission Engineering.

32 Reducing Electricity Cost through Use of Premium Efficiency Motors (February 2010)

motors with premium efficiency counterparts presents businesses with a significant opportunity to reduce operating costs. A comparison between premium and standard efficiency motors from 0.25 to 10 horsepower is conducted; comparisons of full-load efficiencies are shown, and estimated payback periods are calculated. Methods for calculating the yearly kilowatt-hour consumption and yearly cost savings of premium efficiency motors for this horsepower range are also given. The cost advantages of premium efficiency motors are summarized, and relevant examples of real world cost savings are shown.

33 Should You Pay a Premium for a Mounted Ball Bearing (December 2013)

Mounted ball bearings are everywhere in industrial applications. They serve critical roles in keeping a manufacturing operation running smoothly and in ensuring that equipment functions properly and reliably. So why might it be advisable to spend significantly more for a dimensionally comparable bearing from one supplier versus another?

34 Product News (February 2014)

The complete Product News section from the February 2014 issue of Power Transmission Engineering

35 Product News (March 2014)

The complete Product News section from the March 2014 issue of Power Transmission Engineering.

36 Industry News (October 2013)

The complete Industry News section from the October 2013 issue of Power Transmission Engineering.

37 Product News (December 2012)

The complete Product News section from the December 2012 issue of Power Transmission Engineering.

38 Development of an Educational Engineering Workshop on Electric Vehicle and Motor Technology (June 2010)

This paper describes the development of an educational program centered on electric motor and electric vehicle technology at the MIT (Massachusetts Institute of Technology) Edgerton Center.

39 Urban Mobility--Reinventing the Wheel (December 2010)

Suggesting a bicycle is environmentally friendly is stating the obvious. But the Copenhagen Wheel, unveiled at the 2009 COP15 United Nations Climate Conference, is taking green technology and cycling in a new direction.

40 Opportunities Amidst Crises (February 2011)

Energy-challenged industries--and countries--can benefit from improved motor design and materials.

41 Full Throttle (September 2014)

The Formula Renault 3.5 is seen as a crucial stepping stone on the way into the premier class, the Formula 1. Ambitious racers do not just bring their talents - they also have highly efficient motors on board to control the throttle of their 530-hp V8 engines.

News Items About Ohio Electric

1 Snyder Joins Ohio Electric Motors (July 18, 2014)
Ohio Electric Motors, Inc. recently announced that Randall R. Snyder will be their new, sales and marketing manager. “I am extremel...