NORD Gear

Articles About NORD Gear


Articles are sorted by RELEVANCE. Sort by Date.

1 NORD Gear Offers Drive Solutions for Intelligent Brewing (September 2019)

Worm, bevel, and parallel shaft gear units were installed at two breweries to provide the necessary process control.

2 Product News (March 2020)

The complete Product News section from the March 2020 issue of Power Transmission Engineering.

3 A Little Peace of Mind (June 2020)

Condition Monitoring Technology Evolves for Gear Drives, Gearmotors and Gearboxes. Here's a look at what some leading manufacturers are offering.

4 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

5 Product News (September 2019)

The complete Product News section from the September 2019 issue of Power Transmission Engineering.

6 Saving Money with High-Efficiency Gearmotors (October 2019)

Standing in a factory or a warehouse, you're bound to notice machinery, whether it's a conveyor system that winds across the floor or large fans that hang from the ceiling. You may even notice automated guided vehicles or autonomous mobile robots carrying parts, driving themselves from one section of the building to another. These machines are good candidates for using high-efficiency gearmotors, especially if they're expected to run for long stretches at a time. If they aren't using high-efficiency gearmotors, then they may be costing more money than they should.

7 Insider's Guide to Automate 2019 and Promat (March 2019)

Automate Show Examines the Integration of Robotics, Automation and Machine Vision, while Promat explores the latest in material handling technology.

8 Product News (October 2012)

The complete Product News section from the October 2012 issue of Power Transmission Engineering.

9 Pack Expo: Automation and Education (September 2018)

Ask any exhibitor at Pack Expo International and the co-located Healthcare Packaging Expo (Oct. 14-17 at McCormick Place, Chicago) why they're there, and you'll probably get the same response: end users.

10 Product News (October 2010)

The complete Product News section from the October 2010 issue of Power Transmission Engineering.

11 Product News (August 2018)

The latest products from Kluber Lubrication, Joral, Igus, Portescap, Rexnord, Gearing Solutions, Nord, Rheintacho, GWJ Technology and Miki Pulley.

12 Food & Beverage Industry Product Round-Up (August 2018)

Some of the latest power transmission and mechanical motion products specifically designed for food and beverage applications.

13 Stable and Streamlined (September 2018)

Gear drives focus on longevity, quality and customization.

14 Industry News (April 2018)

The complete Industry News section from the April 2018 issue of Power Transmission Engineering.

15 Product News (September 2018)

The complete Product News section from the September 2018 issue of Power Transmission Engineering.

16 Purchasing Efficiency (September 2018)

You may have noticed a lot of merger and acquisition activity lately in the power transmission industry. What does it mean?

17 Product News (September 2017)

The complete Product News section from the September 2017 issue of Power Transmission Engineering.

18 Product News (December 2018)

The complete Product News section from the December 2018 issue of Power Transmission Engineering.

19 Product News (June 2017)

The complete Product News section from the June 2017 issue of Power Transmission Engineering.

20 Product News (October 2017)

New HMI from Siemens, ITAMCO ramps up additive manufacturing, LM76 introduces new linear bearings, plus other new products from around the industry.

21 Familiar Goals, New Solutions (October 2017)

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)

22 Industry News (December 2017)

The complete Industry News section from the December 2017 issue of Power Transmission Engineering.

23 Product News (February 2018)

The latest mechanical power transmission products from Nord Drivesystems, Gearing Solutions, Ogura Industrial, Stafford Manufacturing, Rexnord, Portescap, Steinmeyer, Intellidrives, J.W. Winco and Zero-Max.

24 Industry News (August 2019)

The complete Industry News section from the August 2019 issue of Power Transmission Engineering.

25 Product News (April 2020)

The complete Product News section from the April 2020 issue of Power Transmission Engineering.

26 Creature Comfort (February 2020)

Intelligent drive technology in the cowshed

27 Dynamic Behavior of Planetary Gears (June 2020)

In planetary gear systems of high power density and high gear ratio, helical gears create undesirable tilting moments on the planet gears; therefore, spur gears are still preferred for planetary gears -- a special challenge with respect to noise. Specifically, the different behavior of planetary gears with sequential and symmetric gear mesh is explained in this paper.

28 Product News (September 2020)

The complete Product News section from the September 2020 issue of Power Transmission Engineering.

29 The 2020 Packaging and Processing Experience (October 2020)

Virtual Pack Expo offers reimagined digital platform

30 Help Wanted (September 2020)

Options available for those looking for safe, online/in-person gear knowledge.

31 A Mechatronic State of Mind (February 2020)

Welcome to the Age of Information, where flexible, intelligent drive systems separate the haves from the have nots

32 Driving Gears 2019 (September 2019)

Efficiency, power-loss reduction and enhanced performance are just a few examples of what the PT community wants from their gears and gear drives in 2019. Some companies are doubling down on service and assembly capabilities while other others are integrating components in an effort to increase flexibility and control.

33 Industry News (April 2019)

The complete Industry News section from the April 2019 issue of Power Transmission Engineering.

34 Product News (March 2019)

The complete Product News section from the March 2019 issue of Power Transmission Engineering.

35 Industry News (June 2019)

The complete Industry News section from the June 2019 issue of Power Transmission Engineering.

36 Using Couplings to Reduce Downtime (August 2019)

Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.

37 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

38 Heavy Industry and Smart Technology (February 2019)

Heavy industry. The phrase conjures images of mines and steel mills, of huge caverns underground, of cavern-like factories, of oldline companies operating heavy-duty machines for hightorque work. That's the image of heavy industry. Today, though, there's also another image. It's of an operator walking a steel mill's floor, looking at his smartphone or his tablet.

39 Product News (Fall 2007)

Latest Product News

40 Electric Automation Trends Discovered at SPS-IPC Drives 2011 (December 2011)

SPS-IPC Drives 2011, which took place in Nuremburg, Germany in November, covered all components down to complete systems and integrated solutions in the electric automation industry.

41 Product News (April 2013)

SKF energy-efficient bearings, Bishop Wisecarver guided motion system, Weiss torque rotary table, Mico wireless braking system, Nord worm gear series, and SKF expanded range of couplings.

42 The Quick Fix - Rexnord Solves Bearing Installation and Removal Challenges (June 2012)

At a Midwestern producer of tubular steel products, measures taken to counteract the effects of impact on a quench tank roll made it difficult to remove and replace the conventional pillow block bearings that support the roll’s shaft.

43 Product News (June 2012)

The complete Product News section from the June 2012 issue of Power Transmission Engineering.

44 Product News (August 2012)

The complete Product News section from the August 2012 issue of Power Transmission Engineering.

45 A Case for Large-Scale Manufacturing (October 2011)

Big components aim to revive the North American industrial market.

46 Motors Technology Update (April 2011)

The latest in motors technology from leading manufacturers.

47 Product News (August 2013)

The complete Product News section from the August 2013 issue of Power Transmission Engineering

48 PT Extras (August 2013)

Gear Expo coverage, plus a new video from Motion Industries and Rexnord.

49 Bearing Lubrication Under Extreme Conditions, Part II (February 2008)

Rolling element or sleeve bearings often are required to operate under extreme conditions. In these instances, it is more important than ever to follow proper lubrication selection and maintenance procedures to maximize effective life and efficient performance.

50 Product News (February 2011)

The complete Product News section from the February 2011 issue of Power Transmission Engineering.

51 Product Focus: Gears and Gear Drives (February 2011)

In this special news section, the editors of Power Transmission Engineering have gathered the latest product news and information from the gears and gear drives sector.

52 Motion, Drive and Automation at Hannover Messe 2013 (February 2013)

Power transmission and motion control companies will be on-hand during Hannover Messe 2013 to display the latest technology offerings in key product categories including roller bearings, gears, pumps, motors, transmissions, drive system components, clutches and braking systems.

53 Product News (December 2013)

The complete Product News section from the December 2013 issue of Power Transmission Engineering.

54 Product News (March 2016)

News about the latest Products

55 Industry News (February 2016)

Latest news from around the Industry

56 Clutches: Declassified (March 2016)

In the world of PT components, the clutch gets absolutely no recognition whatsoever. There are entire magazines dedicated to gears, bearings and motors, but clutches get very little press outside of the automotive industry.

57 Product News (June 2016)

Latest news on products.

58 Taking Aim at Conveyor Systems (October 2016)

It's no secret that conveyor systems are the primary market for gearmotors, and so it shouldn't be much of a surprise that gearmotor manufacturers are looking for ways to cater to that market's needs. From Brother's new VFDs to Siemens' Simotics S-1FG1, a lot of the new solutions in the industry have their own unique quirks, but all fall into a few common veins.

59 Product News (February 2016)

Latest information about upcoming products.

60 Chains and Belts Play to Their Strengths (December 2015)

As with just about everything else in the manufacturing world — and all which that universe entails — it depends. After all, that’s why the art of manufacturing is a process — not a one-system-fits-all discipline. Yes, once that process has been properly designed and correctly implemented for a given manufacturing production need, it may well run like the astest, smoothest cookie-cutter-type operation ever devised.

61 How to Spec a Mill Gear (February 2014)

This paper outlines the design considerations that go into construction of a drive system in order to explain the importance of specific data, why it is required, and where design freedom is necessary. Apart from loads and speeds, interface dimensions and site specific conditions are also needed. Deciding up front which gear rating practice to select can affect the torque capacity of the drive train by ~15%.

62 Industry News (December 2013)

The complete Industry News section from the December 2013 issue of Power Transmission Engineering.

63 Ask the Expert (February 2015)

Questions by readers answered by Experts in the field.

64 Engineering Showcase 2015 (March 2015)

One of our goals at Power Transmission Engineering is to help you understand, identify and select the best technology for your mechanical power transmission or motion control applications. With every project, you have to decide which components to use, and which suppliers, based on functionality, quality and price. We aim to help you make those decisions informed by providing the latest information on current technology, especially when it comes to mechanical components.

65 Product News (December 2015)

News about latest products

66 Product News (March 2017)

The complete Product News section from the March 2017 issue of Power Transmission Engineering.

News Items About NORD Gear

1 IPPE Preview: NORD Gear (January 24, 2020)
NORD Gear Corporation will showcase a variety of its solutions for the poultry industry at the International Production & Processing ...

2 Nord Gear Soft Starters Eliminate Mechanical Strain (December 24, 2015)
Nord Gear offers the SK135E/SK175E soft start drive family. The starters are designed to be used in a distributed control system and ca...

3 Nord Gear Units Drive Construction Project (March 22, 2013)
In an extremely demanding construction project in the Swiss Alps, at an altitude of around 1,700 meters and almost 600 meters inside a mo...

4 Nord Gearmotors Offer Reliability for Rolling Mills (January 16, 2012)
In recent years, Nord Drivesystems has been very active in the steel industry in China and India. Nord has supplied 2,500 geared motors t...

5 Nord Gear Expands in Wisconsin (May 24, 2007)
Nord Gear added a new gearbox assembly center and a new paint booth to its newly expanded facility in Waunakee, WI. The large gearbox ...

6 Nord Geared Motors Crucial for Automatic Sorting System (November 24, 2010)
Specializing in the delivery of express parcels, Chronopost employs more than 3,500 people across the world. The Chilly Mazarin hub, to t...

7 Nord Gear Offers Custom Components Without Added Lead Time (March 18, 2016)
A fully equipped machine shop with highly trained machinists allows for Nord Gear Corporation; manufacturer of speed reducers, electric m...

8 Expo Pack 2018 Preview: Nord Gear (May 10, 2018)
Nord Gear brings integrated material handling solutions to Expo Pack 2018, June 5-8, 2018 at the Expo Santa Fe Mexico, Mexico City, Mex...

9 NORD Gear Offers Broad Range of Service and Support Options (July 29, 2019)
One of the hallmarks of exceptional customer service is ensuring someone in the organization is available 24 hours a day, seven days a we...

10 Pack Expo Recap: NORD Gear (September 26, 2019)
Here are some product highlights from NORD during the recent Pack Expo in Las Vegas: NORD presented the new SK 871.1, SK 971.1, and ...

11 Promat 2019 Preview: Nord Gear Corporation (March 1, 2019)
At Promat 2019, Nord will display new drive technology for conveyor and warehousing systems, increasing productivity and return on invest...

12 GEAPS Exposition Preview: Nord Gear (February 8, 2019)
No matter what your role is in the grain industry, visit Booth #2133 during the Grain Elevator and Processing Society (GEAPS) Exposition,...

13 IPPE 2019 Preview: Nord Gear Corporation (January 10, 2019)
Nord Gear Corporation is attending the world's largest annual poultry, meat and feed industry event, the International Production &am...

14 Nord Gear Assembles Industrial Gear Drives in Wisconsin (August 16, 2016)
Nord Gear Corporation is now assembling its line of Maxxdrive large industrial gear drives at the Waunakee, Wisconsin plant. With a build...