Articles About Hydraulic Brakes
Articles are sorted by RELEVANCE. Sort by Date.
a custom hydraulic brake system from Mico Inc. aid in the development of specialized material handling equipment.
The complete Industry News section from the December 2013 issue of Power Transmission Engineering.
The scene is serene and picturesque. Sunshine reflects off the light chop of the Ohio River, as a barge winds its way into view. While those driving along Louisvilleâ™s River Road may be inclined to reach for a camera to capture this idyllic scene, the mood at Nugent Sand Company is anything but tranquil.
Tucked away in the southwest quadrant of the state of Georgia, amid stately pine stands, pecan farms and cotton fields, sits Oak Crest Lumber.
In the past decade, electrohydraulic braking systems--including ABS and traction control--have grown increasingly popular, due largely to the vehicle design flexibility and performance advantages they offer. The industry has seen several other instances of intelligent machine controls, unrelated to braking, over the years as well. But what all of these technologies have typically had in common is that theyâ™ve existed as standalone, point-to-point functions that have not been integrated together. The present and future of braking is all about taking the next logical step--getting fully connected and finding ways to embed intelligence throughout a machine.
Servo system from Bosch-Rexroth helps create more efficient beverage palletizer.
Corporate and personnel announcements from the April 2017 issue of Power Transmission Engineering.
Latest Sealing Technologies Offer Optimum Wear and Frictional Characteristics.
The U.S. Space Shuttle fleet was originally intended to have a life of 100 flights for each vehicle, lasting over a 10-year period, with minimal scheduled maintenance or inspection. The first space shuttle flight was that of the Space Shuttle Columbia (OV-102), launched April 12, 1981. The disaster that destroyed Columbia occurred on its 28th flight, February 1, 2003, nearly 22 years after its first launch.
Reading Rock manufactures concrete blocks - the kind that were probably used to build the schools that you attended. With employees working three shifts six to seven days a week, they make plenty of them.
This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.
Cement Backer Board Plant Utilizes Oil Shear Clutch Brake
Navigating Clutch/Brake Operation in Harsh Environmental Conditions: Chemicals, saltwater, food particles, heat, dust, and electrical corrosion are just a few of the many issues that can cause clutches and brakes to fail prematurely.
The automotive world faces a tremendous change. Autonomous driving and electrification are two big topics in this context that are pushing this change. The demand for higher comfort, higher safety and tightened environmental requirements drive as well the technological change from former mechanical actuations to electro-mechanical systems in new vehicles. This can be observed especially for braking and steering systems.
The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.
The complete Industry News section from the March 2018 issue of Power Transmission Engineering.
Large hydraulic cylinders (LHCs) are integral components in the functioning of large machines in mechanically demanding, corrosive and abrasive environments, such as offshore drilling rigs. The materials utilized in these largescale hydraulic systems must deliver reliable performance throughout their expected lifecycle.
Medical imaging equipment, water handling systems, conveyors, robotic systems and rotary and linear actuators are among the many devices that may be fitted with electric friction brakes to hold their loads in place when the power is off or disrupted.
Oil shear brake technology is the key to quick and reliable test stand development.
Th e Allen Telescope Array at Hat Creek, CA is a joint venture between the University of California Berkeley and the SETI Institute of Mountain View, CA. SETI has hired Minex Engineering of Antioch, CA to help with the design and installation of state-of-the-art drives and controls for the antenna array.
Fluid Power, Motion Control and Power Transmission Industries Come Together in Las Vegas to Promote New Solutions.
IFPE offers the right balance of technology and education.
EECV in Rotterdam, the Netherlands, keeps on expanding and improving. In 2013 their transhipment of coal increased and they installed a new bucket wheel reclaimer with a capacity of 3,500 tons per hour. They chose a direct-drive system from Bosch Rexroth for this big bucket wheel. The drive system consists of a HÃ¤gglunds MB 1600 motor and a DUe drive unit.
After a brief introduction to the importance of gear pumps in internal combustion engines, as well as in the most diverse hydraulic applications, a calculation method was applied that allows for sizing with considerably higher delivery rates. Upon identifying and analyzing a traditional pump, along with two construction solutions of asymmetric gear pumps, we then compared their related performances.
The complete Industry News section from the August 2012 issue of Power Transmission Engineering.
Seal design engineers and end users are continually seeking improved sealing systems and materials. This paper describes the potential of a new thermoplastic polyurethane (TPU) material to deliver improvements in pressure, speed and temperature capability, which are presented as comparisons to proven industry standard materials. Performance is demonstrated by virtue of test bench results of seals made from MDI-, PPDI- and NDI-based materials.
This case study presents how electronics and software can be applied to a mobile hydraulic application, as well as how electro-hydraulics have evolved over time.
The complete Industry News section from the April 2011 issue of Power Transmission Engineering.
The National Fluid Power Association (NFPA) is an organization consisting of manufacturers, distributors, suppliers and educators working together to strengthen the fluid power market. Its mission is to serve as a forum where all fluid power channel partners can advance fluid power technology and successfully compete in the global industrial market.
While the basic design of iron and coke blast furnaces is centuries old, today's steel makers are looking for innovative ways to produce molten iron with increased production and efficiency
News From Around the Industry
Implementing a power-on-demand concept based on variable speed drives allows for energy saving in any application that involves pumps or hydraulic systems. And when used in combination with an intelligent wiring and communication system, relevant machine data can also be easily recorded - the basis for comprehensive power management.
News from around the industry.
Action Challenge Introduces Students to Fluid Power Industry in the latest STEM educational effort from the National Fluid Power Association.
When trying to find a new bonding material dispense system, one manufacturer tested a series of pumps â” all of which leaked due to the abrasiveness of the bonding material. The manufacturer also had been attempting to manage shot size manually with their previous system, and was not able to keep dispense consistent. The company searched for a system that could accurately dispense programmed shot sizes while also eliminating the leaking issues they had experienced with previous pumps. Graco provided a Check-Mate pump with SmartWare software, and the manufacturer is now able to automatically dispense shots of bonding material as small as one ounce without leaks.
News from around the Industry.
Latest news from around the Industry
News from around the Industry
The complete product news section from the October 2008 issue of Power Transmission Engineering (PTE).