Heidenhain Corp

Articles About Heidenhain Corp


Articles are sorted by RELEVANCE. Sort by Date.

1 IMTS 2016 Booth Preview (August 2016)

A nose-in-the-tent peek at the booths featuring mechanical motion components.

2 Industry News (Fall 2007)

news froma round the Industry

3 Wall to Wall Technology (August 2014)

With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.

4 Product News (October 2014)

News about new Products in the industry.

5 Fluid Power Free-for-All (February 2014)

IFPE offers the right balance of technology and education.

6 Influence of Gear Loads on Spline Couplings (February 2014)

Involute splines are commonly used in gearboxes to connect gears and shafts, especially when high torque is transmitted through the coupling. The load is shared among multiple teeth around the coupling circumference, resulting in higher load capacity than a conventional single key. However, the total load is not equally shared among all spline teeth, mainly because of pitch deviations resulting from the manufacturing process. The load distribution along the spline engagement length is also nonuniform because of tooth misalignments and shaft torsional effects. This paper presents an investigation of the influence of spur gear loads on the load distribution of spline teeth.

7 Product News (April 2011)

The complete Product News section from the April 2011 issue of Power Transmission Engineering.

8 The Future Rests on the River Leine (March 2015)

“[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.”

9 Engineering Showcase 2015 (March 2015)

One of our goals at Power Transmission Engineering is to help you understand, identify and select the best technology for your mechanical power transmission or motion control applications. With every project, you have to decide which components to use, and which suppliers, based on functionality, quality and price. We aim to help you make those decisions informed by providing the latest information on current technology, especially when it comes to mechanical components.

10 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

11 Guide to V-Belt Selection and Replacement (June 2017)

V-belts look like relatively benign and simple pieces of equipment. They're basically a glorified rubber band, right? Need a replacement? Just measure the top width and circumference, find another belt with the same dimensions, and slap it on the drive. There's only one problem: that approach is about as wrong as you can get.

12 Industry News (September 2017)

The complete Industry News section from the September 2017 issue of Power Transmission Engineering.

13 Industry News (February 2017)

The complete Industry News section from the February 2017 issue of PTE.

14 Chains and Belts Play to Their Strengths (December 2015)

As with just about everything else in the manufacturing world — and all which that universe entails — it depends. After all, that’s why the art of manufacturing is a process — not a one-system-fits-all discipline. Yes, once that process has been properly designed and correctly implemented for a given manufacturing production need, it may well run like the astest, smoothest cookie-cutter-type operation ever devised.

15 Wind Pushing Future of Mechanical Components (April 2015)

After a sluggish 2013, annual installations of new wind turbines grew by 44% in 2014, according to the Global Wind Energy Council. And while much of that growth has been in Asia— particularly China, which now leads the world with 114 GW of installed capacity—the USA, Europe, and the rest of the world expect steady growth for the next couple of years as well (Fig. 1).

16 And the Winner Is (August 2015)

Excellence Awards Competition, sponsored by the Metal Powder Industries Federation, were recently announced at the POWDERMET2015 International Conference on Powder Metallurgy & Particulate Materials. Receiving grand prizes and awards of distinction, the winning parts are examples of PM’s precision, performance, complexity, economy, innovation and sustainability. The winning parts show how customers from around the world are taking advantage of PM’s design advantages.

17 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

18 Why Direct Drive (March 2017)

In today's highly competitive world, the better someone understands the advantages and benefits of direct drive technology, then the more they will have an advantage in machine building, giving them an edge over their competition.

19 Product News (June 2010)

The complete Product News section from the June 2010 issue of Power Transmission Engineering.

20 Product News (April 2012)

The complete Product News section from the April 2012 issue of Power Transmission Engineering.

21 Product News (April 2010)

The complete product news section from the April 2010 issue of Power Transmission Engineering.

22 Product News (February 2010)

The complete Product News section from the February 2010 issue of Power Transmission Engineering.

23 Product News (February 2008)

The complete Product News section from the February 2008 Power Transmission Engineering.

24 Product News (August 2008)

The complete product news section from the August 2008 issue of Power Transmission Engineering.

25 Industry News (February 2014)

The complete Industry News section from the February 2014 issue of Power Transmission Engineering.

26 Product News (August 2014)

The complete Product News section from the August 2014 issue of Power Transmission Engineering

27 Industry News (March 2016)

News from around the industry

28 Product News (February 2017)

The complete Product News section from the February 2017 issue of Power Transmission Engineering.

29 Product News (September 2015)

News about new Products

30 The Importance of Thermal Protection for Torque Motors (August 2015)

When talking about high-end machining or manufacturing applications that include direct-drive technology, one of the key advantages of utilizing this particular transmission method is its endurance. Because of the very nature of direct-drive motors they are able to operate at peak performance levels indefinitely — without any kind of wear or aging — as long as the motor isn’t pushed past its capacity. Unfortunately, because this isn’t a perfect world, unexpected things can happen which can cause the motor to overheat. Whether the heat source is due to a parameter being input incorrectly, or an unexpected external force causing more resistance than expected — it is important to have certain forms of thermal protection in place. Since torque motors are built in such a way that they cannot be repaired and yet maintain their efficiency, it is vital to prevent any overheating — thus precluding the need to purchase a new one.

31 Product News (September 2014)

The complete Product News section from the September 2014 issue of Power Transmission Engineering.

32 Product News (June 2015)

News about latest Products in the Industry

33 Product News (April 2009)

The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.

News Items About Heidenhain Corp

1 Photonics West Preview: Heidenhain Corp. (January 11, 2017)
Heidenhain will be showing precision measurement components for the photonics industry at the upcoming Photonics West trade show in San F...