Flat Belt Pulleys

Articles About Flat Belt Pulleys


Articles are sorted by RELEVANCE. Sort by Date.

1 Timing Belts and Pulleys - Operations (December 2016)

Synchronous drives are especially well-suited for low-speed, high-torque applications. Their positive driving nature prevents potential slippage associated with V-belt drives, and even allows significantly greater torque carrying capability. Small pitch synchronous drives operating at speeds of 50 ft/min (0.25 m/s) or less are considered to be low-speed. Care should be taken in the drive selection process as stall and peak torques can sometimes be very high. While intermittent peak torques can often be carried by synchronous drives without special considerations, high cyclic peak torque loading should be carefully reviewed.

2 How to Prevent Pulley Slippage (February 2017)

I'm not able to get a good connection between the pulley and shaft in my drive assembly. Could you explain the various ways of connecting a pulley to a shaft to prevent the pulley from slipping?

3 Pushing Forward with Belts and Chains (June 2018)

The technology continues to evolve in chain- and belt-driven systems

4 Guide to V-Belt Selection and Replacement (June 2017)

V-belts look like relatively benign and simple pieces of equipment. They're basically a glorified rubber band, right? Need a replacement? Just measure the top width and circumference, find another belt with the same dimensions, and slap it on the drive. There's only one problem: that approach is about as wrong as you can get.

5 Improperly Testing Belt Tension Can Easily Damage Small Motors (February 2019)

Most of us want to just instinctively squeeze a belt between a pair of pulleys to test the belt tension. What is not as instinctive is just how much force such a procedure can put on the shaft -- often significantly past the manufacturer's rated limits for small motors. This can cause damage to both the shaft and the bearings.

6 Belt and Chain Technology (October 2020)

The following article examines some of the most recent product and industry news related to belts and chains, including news from Continental, Gates, Igus and Tsubaki.

7 Advanced Belt Drive Systems (June 2019)

Enhancing Safety, Quality, Delivery and Cost.

8 Custom Machine and Tool Bolsters Accuracy and Efficiency for Vande Berg Scales (June 2018)

If you can find that magic bullet that will reduce the machining process, you can achieve meaningful efficiency gains. It is imperative that check-weighers or in-motion weighing systems remain both accurate and efficient while attaining a consistently smooth operation because they dynamically weigh products as they move across the belt.

9 Guide to Selecting and Replacing Synchronous Belts (June 2016)

Just as we now consider rotary dial phones archaic, so are many installed synchronous belt drives. That they continue to operate is testimony to their durability. But that should not prevent you from taking advantage of newer synchronous belt drive technology that can improve both equipment design and field installations.

10 Musical Gearboxes (October 2013)

Dave Soma, the mechanical supervisor at Leland Olds Station, a coal-fired power plant near Stanton, North Dakota, says he and his maintenance team care deeply about keeping the plant running and providing people electricity, especially in the dead of winter.

11 Total System Efficiency (February 2010)

Much of the industrial energy being consumed by systems is wasted through inefficiency. For this article, a system will be defined as the following components working together: electrical input power, variable frequency drives, induction motors, gearboxes and transmission elements (chains, belts, etc.).

12 Analyzing Synchronous Belt Failure (October 2009)

If you’re replacing your belts more than once per year, it’s time to analyze your drive. From belt crimping damage to high belt installation tension to sprocket misalignment and adverse environmental conditions, this guide walks you through how to identify the reasons behind premature failure and makes recommendations on corrective and preventive measures.

13 The Automated Parking Garage (September 2014)

ContiTech and Wöhr Team up for Unique Residential Solution.

14 Belts Vs. Couplings (August 2015)

rotary-type blowers? Examples: for motor KW; RPM; temperature; pressure production; lifetime; etc. In other words, how do I choose between belts or couplings?

15 Hovercraft Technology Taking Us Back to the Future (December 2015)

There are few things in this world that elicit such a gleeful, childlike sense of wonder as does the word “hoverboard”.

16 Chains and Belts Play to Their Strengths (December 2015)

As with just about everything else in the manufacturing world — and all which that universe entails — it depends. After all, that’s why the art of manufacturing is a process — not a one-system-fits-all discipline. Yes, once that process has been properly designed and correctly implemented for a given manufacturing production need, it may well run like the astest, smoothest cookie-cutter-type operation ever devised.

17 Belt Drive Offers High-Precision Alternative (August 2009)

Bosch Rexroth assists Bell-Everman with linear actuator development.