David Brown and Santasalo
Articles About David Brown and Santasalo
Articles are sorted by RELEVANCE. Sort by Date.
News from around the industry
The complete Industry News section from the October 2013 issue of Power Transmission Engineering.
News about industry products.
Rolling-element bearings are high-precision components that need to be stored and handled carefully to perform as designed. Proper storage and handling of a bearing before, during and after installation is important because once debris enters a bearing, it reduces the life.
News about the most recent products to hit the market.
News from around the Industry.
I was invited by Tom Astrene of TLT to write a response to the July 2010 TLT article (Ref. 1). My rebuttal â” âœIn Search of a Fatigue Limit: A Critique of ISO Standard 281:2007â â” was published in Tribology and Lubrication Engineering, TLT, August 2010 edition (Ref. 10). While this article is also available online, I will attempt to summarize the essence of my response.
In the world of PT components, the clutch gets absolutely no recognition whatsoever. There are entire magazines dedicated to gears, bearings and motors, but clutches get very little press outside of the automotive industry.
This paper provides a mathematical framework and its implementation for calculating the tooth geometry of arbitrary gear types, based on the basic law of gear kinematics. The rack or gear geometry can be generated in two different ways: by calculating the conjugate geometry and the line of contact of a gear to the given geometric shape of a known geometry (e.g., a cutting hob), or by prescribing the surface of action of two gears in contact and calculating the correspondent flank shapes.
Latest news from around the Industry
News about upcomming products
One of our goals at Power Transmission Engineering is to help you understand, identify and select the best technology for your mechanical power transmission or motion control applications. With every project, you have to decide which components to use, and which suppliers, based on functionality, quality and price. We aim to help you make those decisions informed by providing the latest information on current technology, especially when it comes to mechanical components.
Power Transmission Engineering is collaborating with the Bearing Specialists Association (BSA) on a special section within the magazine. Bearing Briefs will present updated reports on bearing topics for each issue in 2016. Complimentary access to all BSA Bearing and Industry Briefs is available on the BSA website at www.bsahome.org/tools.
The complete Product News section from the September 2017 issue of Power Transmission Engineering.
If you can find that magic bullet that will reduce the machining process, you can achieve meaningful efficiency gains. It is imperative that check-weighers or in-motion weighing systems remain both accurate and efficient while attaining a consistently smooth operation because they dynamically weigh products as they move across the belt.
The complete Industry News section from the December 2013 issue of Power Transmission Engineering.
News about latest Products in the Industry
Latest news about upcoming products.
The complete Product News section from the March 2018 issue of Power Transmission Engineering.
Our expert explores standard vs. optimized gears, as well as high contact ratio gearing.
Part 1: There seems to be a lot of confusion about the voltage standards for motors and why they are structured the way they are. Part 2: The effect of low voltage on electric motors is pretty widely known and understood, but the effect of high voltage on motors is frequently misunderstood.
The complete Industry News section from the September 2017 issue of Power Transmission Engineering.
The complete Product News section from the December 2017 issue of Power Transmission Engineering, featuring the latest from SKF, R+W, Brecoflex, Nexen, GÃ¼del, Renold Gears, Hansford Sensors, Ogura Industrial, Igus, Destaco, RÃ¶hm and Iwis.
Oil shear brake technology is the key to quick and reliable test stand development.
News From Around the Industry
News from around the Industry
The complete Product News section from the October 2010 issue of Power Transmission Engineering.
American Bearing Manufacturers Association (ABMA) Standard 9 and ISO 281 give equations for calculating the basic dynamic radial load rating for ball bearings. These equations are based on a number of assumptions, many of which are not valid for thin-section bearings. (Thin-section bearings are described in ABMA standard 26.2.) Nevertheless, many thin-section bearing catalogs report load ratings based on these equations. Kaydon has developed a new method for calculating the dynamic radial load rating for thin-section ball bearings. The new method uses the contact stress and the number of stress-cycles-per-revolution to calculate the capacity. The new numbers are based on five years of actual test results. These equations can also be used to calculate the dynamic radial load rating for four-point contact ball bearings, which are not covered in ABMA standard 9 or ISO 281.
The primary driver of an airport baggage handling queue conveyor must be able to operate under increasingly demanding operating conditions, including frequent starting and stopping. The selection of the primary driver of the queue conveyor is dependent on multiple criteria, including dimensional requirements and durability characteristics.
a custom hydraulic brake system from Mico Inc. aid in the development of specialized material handling equipment.
The complete Product News section from the June 2010 issue of Power Transmission Engineering.
The complete Product News section from the February 2010 issue of Power Transmission Engineering.
News from around the Industry
The complete Product News section from the August 2013 issue of Power Transmission Engineering
Few industries are experiencing change quite as fast as the packaging arena. Lighter-weight containers are being introduced to reduce costs and energy use, packaging is being redesigned to attract consumer attention and manufacturers are using fewer materials in an effort to address environmental concerns.
The Magnetic Gearing and Turbine Corp. (MGT), founded by Australian inventor Andrew French in 2000, manufactures injection molded gears and couplings based entirely on magnetic technology. The repulsive magnetic forces are used to transmit power without losing any energy, and drive shafts rotate completely independently of each other.
This article is designed to help describe the selection process of a reducer to be used in the parcel handling industry. It will go over the different applications for which gearboxes are used throughout parcel handling facilities such as UPS, FedEx and DHL.
The complete Product News section from the April 2012 issue of Power Transmission Engineering.
Beginning with a brief summary and update of the latest advances in the calculation methods for worm gears, the author then presents the detailed approach to worm gear geometry found in the revised ISO TR 10828. With that information, and by presenting examples, these new methods are explained, as are their possibilities for addressing the geometrical particularities of worm gears and their impact upon the behavior and load capacity of a gearset under working conditions based on ISO TR 14521 â” Methods B and C. The author also highlights the new possibilities offered on that basis for the further evolution of load capacity calculation of a worm gearset based on load and contact pressure distribution.
If you read only one article this issue, it should be Norm Parkerâ™s article on the Chinese bearing manufacturing industry. Parker is an engineer with General Motors, a true industry insider who has become a regular contributor to Power Transmission Engineering.
PERSONNEL CHANGES AND EXPANSION HIGHLIGHT CICERO, ILLINOIS GEAR MANUFACTURER
The Calendar for events happening in the industry
The complete Product News section from the September 2014 issue of Power Transmission Engineering.
The scene is serene and picturesque. Sunshine reflects off the light chop of the Ohio River, as a barge winds its way into view. While those driving along Louisvilleâ™s River Road may be inclined to reach for a camera to capture this idyllic scene, the mood at Nugent Sand Company is anything but tranquil.
The complete Product News section from the August 2012 issue of Power Transmission Engineering.
The complete Product News section from the December 2012 issue of Power Transmission Engineering.
It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.
A reader asks what are the required parameters to properly specify a gear.
News Items About David Brown and Santasalo
1 David Brown and Santasalo Merge to Serve Growing Gear Customer Base (June 3, 2016)
David Brown and Santasalo merged on June 1st to create David Brown Santasalo. With more than 1,000 employees, seven major manufacturing p...