Composite Shaft Couplings

Articles About Composite Shaft Couplings


Articles are sorted by RELEVANCE. Sort by Date.

1 How to Prevent Pulley Slippage (February 2017)

I'm not able to get a good connection between the pulley and shaft in my drive assembly. Could you explain the various ways of connecting a pulley to a shaft to prevent the pulley from slipping?

2 Case Study: JBJ Techniques and the BLOODHOUND SSC Project (April 2016)

Specialist power transmission supplier JBJ Techniques Limited, of Redhill, Surrey, England were recently contacted by the staff of Bloodhound SSC R&D engineering team to solve a problem on the fuel pump test rig. JBJ Techniques had worked with various team members in the past and this previous experience made JBJ an easy choice to assist with this project. The scope of supply was to produce a suitable drive coupling with a maximum diameter of 160 mm, capable of transmitting 550 Nm @ 10,000 rpm, with as short an assembly as possible, and at the same time be able to accept misalignment within the drivetrain.

3 Product News (August 2016)

News about industry products.

4 Belts Vs. Couplings (August 2015)

rotary-type blowers? Examples: for motor KW; RPM; temperature; pressure production; lifetime; etc. In other words, how do I choose between belts or couplings?

5 Precision Bellows Couplings (March 2015)

Bellows couplings first began to be widely used by machine tool builders in the mid-to-late 20th century. With the advent of CNC technology, machine engineers started looking to improve upon some of the negative influences traditional power transmission couplings can have on a precision rotary / linear motion system.

6 The Efficient Drive System (December 2013)

It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.

7 Influence of Gear Loads on Spline Couplings (February 2014)

Involute splines are commonly used in gearboxes to connect gears and shafts, especially when high torque is transmitted through the coupling. The load is shared among multiple teeth around the coupling circumference, resulting in higher load capacity than a conventional single key. However, the total load is not equally shared among all spline teeth, mainly because of pitch deviations resulting from the manufacturing process. The load distribution along the spline engagement length is also nonuniform because of tooth misalignments and shaft torsional effects. This paper presents an investigation of the influence of spur gear loads on the load distribution of spline teeth.

8 Getting a Piece of that Sweet Coupling Pie (December 2014)

He was out. Nine years ago, Ross Rivard left the coupling industry for the shimmering new world of luxury automotive components at Lacks Enterprises, where he was immediately enveloped by platinum trim systems and chrome composite wheels. It was glitz and glam and as sparkly clean as the fresh-fromthe-dealership cars his products were embellished onto.

9 Tailor-Made (August 2017)

The Role of Coupling Technology in Current Developments in Industry

10 Coupling Connection (August 2017)

Couplings and harsh environment use

11 Using Couplings to Reduce Downtime (August 2019)

Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.

12 Engineering Showcase - Couplings (August 2019)

Special advertising section focused on couplings.

13 Engineering Showcase - Couplings (August 2018)

This issue Engineering Showcase features some of the leading suppliers of couplings.

14 Thermal Growth Issues and Solutions for Shaft Couplings (August 2018)

Many refineries and chemical plants are built with large pieces of rotating equipment in an outdoor setting exposed to the elements. The author has been researching thermal growth issues for decades across North America.

15 Fluid Couplings vs VFDs for High Inertia Rotating Driven Loads (September 2017)

As the old adage goes, "There is more than one way to skin a cat." In the early stages of any project, system designers are faced with choices; whether they are designing a new application or retrofitting an old one, they need to determine what is the most efficient, economical and practical way of completing the task at hand. Though there are usually at least two viable means to accomplish the task, the first step is always to review and weigh the merits of each option.

16 Couplings: Designed to Carry the Pay(load) (August 2018)

Couplings. There certainly is no shortage of couplings - or things to couple them with. There also seems to be no lack of applications for them. You say you need to reduce the transmission of shock loads from one shaft to another? That's a classic application for shaft couplings; but really, couplings are application-intensive. They're everywhere.

17 Considering the Mechanical Aspects of ATEX (December 2012)

For the past 30 years or more, designers have paid due diligence to the electrical aspect of hazardous atmosphere equipment design, but have often ignored the mechanical side. In recent years, the mechanical aspects of ATEX design have increasingly come to light. Not only do electrical power transmission products, but also mechanical power transmission products need to comply with the ATEX directive.

18 Sorting Out Flexible Couplings (August 2012)

In most cases, industrial power transmission calls for flexible rather than rigid couplings in order to forgive minor shaft misalignment. For that reason, this article will focus solely on the selection of flexible couplings.

19 Bearing Protection Needed if Inverter-Duty Motors Are to Live up to their Name (August 2012)

All major manufacturers of 3-phase AC induction motors offer "inverter-duty" or "inverter-ready” models, but while these motors have inverter-rated insulation to protect the windings, the bearings--their most vulnerable parts--are too often ignored.

20 Reducing Food Processing Plant Energy Costs (February 2016)

U.S. manufacturers, such as food processors, face an unprecedented competitive environment and must look for ways to be profitable without negatively affecting the quality of finished products.

21 University Improves Sustainability of HVAC Motors in Platinum LEED Building (April 2012)

A new preventive maintenance program at a leading New England Ivy League university demonstrates how the push for more sustainable "green" building management has led to a growing awareness of a chronic, widespread problem with HVAC motors—electrical bearing damage and failure.

22 Sky Science (April 2012)

S.S. White Provides Twisting, Turning Power Transmission with Flexible Shafts

23 Flexible Options with Flexible Shafts (August 2013)

You need to transmit a rotary motion where no straight line is possible. Or, you need to allow for some uncontrollable misalignment. How about transmission taking place between moving components? What if you need to control something in hazardous locations where you cannot directly handle the application, such as high-temperature environments, under hazardous conditions or in clean room applications? Functionally designed flexible shafts can meet all these challenges.

24 Torque Arm Design Considerations for Shaft-Mounted Speed Reducers (April 2008)

Most manufacturers of shaft-mounted speed reducers offer torque arms for their products. However, in some situations, a machine designer may be required to design his own.

25 The Science of Radial Shaft Seals (April 2017)

SKF Product Investigation Center Troubleshoots Critical Rotating Equipment Applications with Analysis, Research and Testing Procedures.

26 Understanding the Dynamic Influences of Gear Oils and Radial Shaft Seals (February 2018)

Sustainability is becoming one of the most important aspects within the power transmission business. Users demand low-maintenance drive systems with as little disruption as possible, and expect lifetimes of more than 10,000 hours. Approximately 40 percent of long-term gearbox leakages can be traced back to poor interaction between the radial shaft seal (RSS) and the lubricant. Thus, it becomes essential to analyze the tribological system as a whole, which includes the gear oil, seal grease (if required), elastomer material and design, and the shaft.

27 Safety Elements for Mechanical Torque Limiters (June 2010)

The world of high horsepower drives often calls for mechanical design to be approached from different perspectives. As motors, gearboxes and machines increase in size, power density can become disproportionate from one driveline component to the next, emphasizing the need for more rugged, robust and compact equipment.

28 Electrical and Mechanical Torque Limiting (April 2013)

Q&A: My company manufactures high-speed metal forming machines. We have one application on a feed axis where we are encountering problems with the coupling...

29 Bellows Couplings: Proper Selection for Optimal Performance (February 2009)

For many years bellows couplings have been near the top of the list of flexible coupling choices for high-performance motion systems. Their high torsional stiffness, low moment of inertia and minimal restoring forces under misalignment make them a preferred choice for maintaining tight control over the load.

30 Selection and Performance Criteria for Power Transmission Couplings, Part II (December 2008)

Part I of this article appeared in the October 2008 issue. It provided an overview and general classifi cations of power transmission couplings, along with selection and performance criteria for rigid couplings and misalignment-compensating couplings. Part II continues the discussion with selection and performance criteria for torsionally flexible and combination-purpose couplings.

31 John Oldham: The Coupling Personified (April 2013)

A biographical sketch of John Oldham, inventor of the Oldham coupling.

32 Selection and Performance Criteria for Power Transmission Couplings (October 2008)

Power transmission couplings are widely used for modifi cation of stiff ness and damping in power transmission systems, both in torsion and in other directions (misalignment compensation).

33 Improving Equipment Uptime - Composite Seals Meet the Challenge (October 2009)

In an industrial application, equipment uptime is vital for on-time performance and profitability. The rotating members of industrial machines are subject to the highest degree of wear and are more susceptible to failure than non-moving parts. Bearing surfaces are the most critical and often the most expensive portion of the rotary assembly; it is imperative to protect these components. The primary protector of these components is the industrial seal.