Celera Motion

Articles About Celera Motion


Articles are sorted by RELEVANCE. Sort by Date.

1 Product News (August 2017)

The latest tools and techologies in power transmission, motion control and related components.

2 PRODUCT NEWS (October 2015)

All about new Products

3 Product News (March 2016)

News about the latest Products

4 INDUSTRY NEWS (March 2015)

News From the Industry

5 The Future Rests on the River Leine (March 2015)

“[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.”

6 Product News (April 2015)

Latest Products

7 Product News (June 2015)

News about latest Products in the Industry

8 Product News (August 2015)

News about the latest Products from the Industry

9 Diagnosing the Health of Medical Motors (March 2015)

John Morehead, national sales manager of Crouzet Motors (Vista, CA), was bunkered down in his office in Palatine, IL surrounded at all points by ankle-deep snow from an unfortunately terrible Chicago’s winter night.

10 Industry news (April 2015)

News From Around the Industry

11 Industry News (February 2015)

News from around the Industry

12 Under Pressure (June 2014)

Wichita Clutch helps drive storm simulator at the University of Florida.

13 Inexpensive Methods to Measure the Performance Characteristics of a Linear Motion Device (December 2013)

This article describes a series of tests that can be performed by the average user, with little experience, and without sophisticated measuring instruments, to quickly determine the most important performance characteristics of linear motion systems.

14 Wall to Wall Technology (August 2014)

With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.

15 Value Added at MDA, IANA and IMTS (September 2014)

What was once targeted specifically toward the machine tool and metalworking industries, IMTS 2014 in Chicago spent a great deal of time and resources on automation, controls, mechanical components, self-diagnostics and an increase in productivity on the shop floor.

16 Industry News (September 2015)

News From Around the Gear Industry

17 Product News (March 2015)

New products within the Industry

18 Product News (Spring 2007)

News about upcomming products

19 Industry News (August 2017)

Schaeffler invests in North America, plus other news from around the industry.

20 Miniature Motion Solutions (June 2017)

Motor technology thrives in aerospace/defense applications.

21 MediaMation Utilizes Digitization and Pneumatics to Alter Theater Experience (August 2017)

"For your safety, please keep your hands, arms and legs inside the vehicle at all times."

22 Motors and Mechatronics - Moving to a Higher Plane (September 2017)

This is an article about motors - preventive motor maintenance, actually. And something else - mechatronics. In today's high-tech manufacturing and industrial use environments, it is near impossible to talk about equally complex motor maintenance and repair-or-replace protocols without it.

23 CNC System Upgrades (December 2017)

Automated production of large objects such as auto body prototypes, boat hulls and surfboards traditionally requires computerized numerical control (CNC) systems costing nearly a million dollars. Thomson Cuts Costs and Production Time for Autoscale Inc.

24 Fluid Couplings vs VFDs for High Inertia Rotating Driven Loads (September 2017)

As the old adage goes, "There is more than one way to skin a cat." In the early stages of any project, system designers are faced with choices; whether they are designing a new application or retrofitting an old one, they need to determine what is the most efficient, economical and practical way of completing the task at hand. Though there are usually at least two viable means to accomplish the task, the first step is always to review and weigh the merits of each option.

25 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

26 Product News (March 2017)

The complete Product News section from the March 2017 issue of Power Transmission Engineering.

27 Industry News (April 2016)

News from around the Industry.

28 The Efficient Drive System (December 2013)

It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.

29 IMTS 2016 Booth Preview (August 2016)

A nose-in-the-tent peek at the booths featuring mechanical motion components.

30 Eight Reasons to Use Air Bearings Over Mechanical Bearings (December 2016)

Mechanical guiding systems, such as crossedroller bearings, work well for most motion control applications; however, when precision, angular repeatability, and geometric performance (runout, straightness…) are critical or where submicron bearing rumble is problematic, air bearings are recommended. An air-bearing stage is a rotary or linear positioner that floats on a cushion of air, using one of several preload mechanisms, nearly eliminating mechanical contact and thus wear, friction, and hysteresis effects. Here are eight reasons why an air-bearing stage might be the right choice for your application:

31 Now That Is Smart Manufacturing! (February 2017)

A machine called Sub1 Reloaded solved a Rubik's Cube in 637 thousandths of a second in Munich.

32 Product News (December 2015)

News about latest products

33 Smart Actuators for Off-Highway (February 2013)

Smart actuators bring big benefits to utility and other off-highway vehicles

34 Music in Motion (December 2008)

Woodworking process gets much needed upgrade for guitar manufacturer.

35 Product News (October 2008)

The complete product news section from the October 2008 issue of Power Transmission Engineering (PTE).

36 Control System Upgrades Product Testing and Validation Machinery (December 2008)

Opto 22 Embeds Snap Motion Control subsystem in production equipment to control, monitor and gather operational data.

37 Autosave Increases Productivity, Reduces Downtime for Nestle Purina (August 2009)

As automation devices have grown more complex and have incorporated more plant data in their operation, there is an increased need for programming changes to continue smooth operation or improve performance. In environments requiring frequent changes, it is not uncommon for code to be lost or changes overwritten, resulting in increased downtime and decreased productivity

38 Product News (February 2010)

The complete Product News section from the February 2010 issue of Power Transmission Engineering.

39 Honing a Competitive Advantage (December 2009)

Sunnen grows product portfolio with motion control solution from Siemens.

40 Motion System Management (August 2008)

Companies focus on customization and quality in linear motion

41 Product News (August 2008)

The complete product news section from the August 2008 issue of Power Transmission Engineering.

42 Medical Motion Control (August 2013)

Controls from Quicksilver help in the design and development of medical rehabilitation equipment originally designed for returning astronauts.

43 PT Extras (August 2013)

Gear Expo coverage, plus a new video from Motion Industries and Rexnord.

44 Product News (August 2013)

The complete Product News section from the August 2013 issue of Power Transmission Engineering

45 Product News (February 2008)

The complete Product News section from the February 2008 Power Transmission Engineering.

46 Product News (April 2008)

The complete product news section from the April 2008 issue of Power Transmission Engineering.

47 Product News (April 2010)

The complete product news section from the April 2010 issue of Power Transmission Engineering.

48 Oscillation Welding Protects Pipelines (April 2010)

Ball screw assemblies are key to this patent-pending oilfield corrosion prevention solution.

49 Getting Creative (October 2012)

Beverage industry conveyor pours on advantages in distribution center. Case study describes the new conveying systems at Motion Industries Canada.

50 Guidelines for Designing Better Motion Control Systems (February 2012)

Motion control systems engineers work chiefly in two well-defined areas: 1) new designs and 2) redesigns or retrofits. This article examines the best approach for each option.

51 Selecting and Sizing Ball Screw Drives (October 2012)

The ball screw drive is an assembly that converts rotary motion to linear motion and vice versa. The ball screw drive consists of a ball screw and a ball nut with recirculating ball bearings...

52 Industry News (October 2012)

The complete Industry News section from the October 2012 issue of Power Transmission Engineering.

53 Ball Screws Revisited - Ask the Expert (February 2013)

A reader asks for clarification on last issue's Ask the Expert column about ball screw sizing.

54 PTExtras (December 2012)

Take a look at some of the latest videos posted on powertransmission.com, plus the most recent updates to our online buyers guide.

55 Best Practices for Selecting and Sizing Guide Wheels (October 2011)

How to select a guide wheel with the properties best-suited for a given application to create a system that reduces design costs and engineering changes, and lowers warranty, assembly, installation and mounting costs.

56 Motion Control - Product Spotlight (August 2011)

This special product news section takes a look at the latest in motion control products.

57 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

58 Linear Motion Q&A: Customized Machinery Built with Off-the-Shelf Components (April 2010)

This Q&A session with various experts at Thomson Linear Systems covers linear slides & stages, clutches & brakes, bearings and actuators.

59 The Limbs of Lumenhaus (October 2010)

Motion systems bring award-winning and energy-optimizing “Smart House” to life.

60 Integrated Motion Control in Packaging Machines Delivers Value (June 2011)

Maximizing packaging machine productivity and performance is imperative to success and is driving OEMs to adopt and invest in the latest technologies that can meet their customers’ challenges. At the forefront of these performance-driven technologies is an integrated control system—or programmable automation controller (PAC)—and latest-generation motion solutions.

61 Product News (August 2011)

The complete Product News section from the August 2011 issue of Power Transmission Engineering

62 Industry News (August 2013)

The complete Industry News section from the August 2013 issue of Power Transmission Engineering.

News Items About Celera Motion

1 Celera Motion Veratus Encoder Offers Smallest Package Size in Class (January 19, 2016)
Celera Motion has introduced the new MicroE Veratus Series encoders into its compact encoder range. Built using the company's new Ver...

2 Celera Motion Offers New Motion Control Brochure (November 22, 2017)
Celera Motion, a Novanta Company, has created a new brochure dedicated to innovative applications within mechatronic based motion control...

3 Celera Motion Optira Encoders Provide PurePrecision Optical Technology (December 14, 2016)
Smaller and smarter, the innovative MicroE Optira Series Encoders from Celera Motion is the only encoder in its class to provide a resolu...

4 MicroE and Applimotion Merge to Become Celera Motion (July 28, 2015)
MicroE and Applimotion recently merged to become Celera Motion. The existing MicroE and Applimotion product brand names and positioning w...

5 Celera Motion MicroE Optira Encoders Feature High Resolution and Easy Setup (September 4, 2015)
Celera Motion recently introduced its MicroE Optira Series Encoders. They are the only encoders in their class to provide a resolution of...

6 Celera Motion Agility Series Motors Deliver Smooth Velocity Control (January 29, 2016)
Suited for scanning, pointing, measuring and cutting applications that require extremely smooth velocity control and highly accurate posi...

7 Celera Motion Agility Series Slotless Motors Achieves Less than 2 Percent Torque Ripple, Zero Cogging (June 16, 2017)
Ideally suited for scanning, pointing, measuring and cutting applications that require extremely smooth velocity control and highly accur...

8 Celera Motion Javelin Linear Motors Offers Easy Integration, High Acceleration (January 4, 2016)
Designed for easy integration into OEM assemblies, the Applimotion Javelin Series linear motors are offered in a wide range of low-profil...