Brother Gearmotors

Articles About Brother Gearmotors


Articles are sorted by RELEVANCE. Sort by Date.

1 Energy Efficiency, Configurable Solutions Highlight Pack Expo (December 2014)

A wide variety of companies displayed mechanical power transmission and motion control technologies at Pack Expo, held in November in Chicago. The event, which is the largest packaging and processing trade show in North America, attracted more than 48,000 attendees, according to show owner and producer PMMI. The four-day event included 2,352 exhibiting companies, an increase of more than 19 percent from the previous show in 2012.

2 Industry News (March 2018)

The complete Industry News section from the March 2018 issue of Power Transmission Engineering.

3 Insider's Guide to Automate 2019 and Promat (March 2019)

Automate Show Examines the Integration of Robotics, Automation and Machine Vision, while Promat explores the latest in material handling technology.

4 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

5 Product News (September 2017)

The complete Product News section from the September 2017 issue of Power Transmission Engineering.

6 Product News (September 2016)

News about recent products in the Industry

7 Industry News (October 2015)

News From the gear Industry

8 Product News (August 2016)

News about industry products.

9 Familiar Goals, New Solutions (October 2017)

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)

10 Engineering Showcase - Gearmotors (October 2019)

Special advertising section from the October 2019 issue of Gear Technology.

11 Saving Money with High-Efficiency Gearmotors (October 2019)

Standing in a factory or a warehouse, you're bound to notice machinery, whether it's a conveyor system that winds across the floor or large fans that hang from the ceiling. You may even notice automated guided vehicles or autonomous mobile robots carrying parts, driving themselves from one section of the building to another. These machines are good candidates for using high-efficiency gearmotors, especially if they're expected to run for long stretches at a time. If they aren't using high-efficiency gearmotors, then they may be costing more money than they should.

12 The Doomsday Clock is Ticking for Gearmotor Manufacturers (October 2015)

The secondhand on the Doomsday dial ominously spins around the face, slowly but ever so surely inching the motor industry towards its inevitable terminus:

13 Taking Aim at Conveyor Systems (October 2016)

It's no secret that conveyor systems are the primary market for gearmotors, and so it shouldn't be much of a surprise that gearmotor manufacturers are looking for ways to cater to that market's needs. From Brother's new VFDs to Siemens' Simotics S-1FG1, a lot of the new solutions in the industry have their own unique quirks, but all fall into a few common veins.

14 Six Key Elements of Gearmotor Optimization (August 2017)

How to Ensure Reliable Performance, Increased Efficiency and Lowest Total Cost of Ownership.

15 Direct Drive Technology and its Impact on the Gearmotor Business (December 2009)

An exploration of direct drive motor trends and examples of design uses for direct drives as replacements for gear drives or belt drives.

16 Efficiency of Design (February 2018)

Energy efficiency is for more than just motors. Here are some mechatronics companies making sure you get more bang for your buck when it comes to your power bill.

17 Gearmotors Pulling, Pushing and Controlling Their Weight (October 2018)

Industrial mainstay adapts to remain relevant in a 4.0 world

18 Lightweight, Highly Efficient Drive System (February 2017)

This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.

19 Motors and Mechatronics - Moving to a Higher Plane (September 2017)

This is an article about motors - preventive motor maintenance, actually. And something else - mechatronics. In today's high-tech manufacturing and industrial use environments, it is near impossible to talk about equally complex motor maintenance and repair-or-replace protocols without it.

20 Eats, Drinks and Treats (September 2017)

Process Expo and Pack Expo Highlight the Latest Technology for Food & Beverage Applications.

21 Food & Beverage Industry Product Round-Up (August 2018)

Some of the latest power transmission and mechanical motion products specifically designed for food and beverage applications.

22 Systematic Improvement (March 2019)

With AGVs, a primary bottleneck on productivity is battery life. But when looking at an AGV as a full system, there are plenty of ways this bottleneck can be widened.

23 Packaging Stimulus (April 2009)

Few industries are experiencing change quite as fast as the packaging arena. Lighter-weight containers are being introduced to reduce costs and energy use, packaging is being redesigned to attract consumer attention and manufacturers are using fewer materials in an effort to address environmental concerns.

News Items About Brother Gearmotors

1 Brother Gearmotors Hires Two New Regional Sales Managers (September 30, 2015)
Brother Gearmotors recently added two more regional sales managers: William (Bill) Miicke and Larry Thomas.  The sales managers are...

2 Brother Gearmotors to Launch Conveyor Series Product Line (February 12, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

3 Brother Gearmotors Launches New Website (April 8, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

4 Brother Gearmotors IE3 Gearmotors to be Introduced at Pack Expo (September 23, 2015)
Brother Gearmotors will introduce a line of IE3 premium efficiency gearmotors at Pack Expo Las Vegas, Sept. 28-30. The new IE3 premium e...

5 Applied Mechatronics to Service Brother Gearmotors' California Customers (July 31, 2015)
Brother Gearmotors recently entered into an agreement with Applied Mechatronics. Applied Mechatronics will commence servicing much o...

6 Brother Gearmotors to Showcase Customer Benefits at WestPack (January 28, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

7 Brother Gearmotors Expands Selection of High Torque Mid-Series Gearmotors (March 12, 2015)
Brother Gearmotors, a division of Brother International Corporation that offers sub-fractional AC gearmotors and reducers for the food an...

8 Brother Gearmotors Upgrades Conduit Boxes for Easy Installation (June 28, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

9 Brother Gearmotors Offers 3D CAD Drawings for 1-3 HP Motors (August 22, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

10 Brother Gearmotors Partners with Dart Controls (December 5, 2017)
Brother Gearmotors, a division of Brother International Corporation offering a wide range of ultra-reliable, sub-fractional gearmotors an...

11 Brother Gearmotors Announces New National Sales Director (February 8, 2018)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

12 Brother Gearmotors Introduces Line of Right Angle Hypoid Gearing Brushless DC Gearmotors (July 26, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

13 Brother Gearmotors Introduces Expedited Delivery Service from Tennessee Manufacturing Facility (April 18, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

14 Brother Gearmotors Partners with American Control Electronics (October 4, 2016)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

15 Brother Gearmotors Hires Director of Sales (February 13, 2017)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...

16 Promat 2019 Preview: Brother Gearmotors (February 18, 2019)
Brother Gearmotors, a division of Brother International Corporation that offers a wide range of ultra-reliable, sub-fractional AC gearmot...