B&R Industrial Automation Corp.
Articles About B&R Industrial Automation Corp.
Articles are sorted by RELEVANCE. Sort by Date.
A nose-in-the-tent peek at the booths featuring mechanical motion components.
Latest news from around the Industry
News from around the Industry
If there are two things that are in tight supply in the industry, it's time and talent. Manufacturers are always pressured to do more faster, and the industry is producing fewer experts to help them do it, so the industry's had to get crafty and find what time-cutting procedures they can.
The complete Industry News section from the June 2017 issue of Power Transmission Engineering.
You may have noticed a lot of merger and acquisition activity lately in the power transmission industry. What does it mean?
The complete Product News section from the April 2011 issue of Power Transmission Engineering.
Navigating Clutch/Brake Operation in Harsh Environmental Conditions: Chemicals, saltwater, food particles, heat, dust, and electrical corrosion are just a few of the many issues that can cause clutches and brakes to fail prematurely.
With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.
Automate 2017 (April 3-6) will showcase the full spectrum of automation technologies and solutions, from traditional industrial applications to cutting edge new technologies.
The complete Product News section from the December 2013 issue of Power Transmission Engineering.
The complete Product News section from the December 2010 issue of Power Transmission Engineering
News from around the industry.
News about the most recent products to hit the market.
Latest News from around the Industry
The complete Product News section from the February 2017 issue of Power Transmission Engineering.
With Pack Expo Las Vegas around the corner, we took a look at the state of the packaging industry today to see what you can expect at the show. The answer is more automation.
The Role of Coupling Technology in Current Developments in Industry
The complete Product News section from the March 2017 issue of Power Transmission Engineering.
One of the best things about being a journalist â” whether for example it be reporting on manufacturing, politics, show business, or anything else â” is being paid to âœgo to schoolâ and learning about any number of things that you were perhaps ignorant of at the outset.
News about recent products in the Industry
Latest information about upcoming products.
News from around the Industry
PERSONNEL CHANGES AND EXPANSION HIGHLIGHT CICERO, ILLINOIS GEAR MANUFACTURER
Latest Product News
News from around the industry
The complete Industry News section from the September 2017 issue of Power Transmission Engineering.
For a 5-megawatt wind turbine prototype, aerodyn employs the latest control and software technologies, including a comprehensive PC-based control solution and the new modular TwinCAT Wind Framework. The TwinCAT Wind Framework features the latest software engineering and Big Data applications to extend current Industry 4.0 concepts to the wind energy industry. The modular software supports, for example, the direct provision of sensor data to the operatorâ™s database, and in general enables the easy adaption of the wind turbine operation management to future requirements.
"For your safety, please keep your hands, arms and legs inside the vehicle at all times."
news froma round the Industry
Ask any exhibitor at Pack Expo International and the co-located Healthcare Packaging Expo (Oct. 14-17 at McCormick Place, Chicago) why they're there, and you'll probably get the same response: end users.
The complete Product News section from the September 2018 issue of Power Transmission Engineering.
Motor Operation Gets Big Boost from Smart Technology (Here's How to Take Advantage)
IMTS 2018 had its fair share of machine tools, 3D printers and advanced robotics. Meanwhile, the East Hall â” home to Hannover Messe USA â” took a more systematic approach, highlighting the smart components and techniques that will be integral in developing the digital factory of the future.
The complete Product News section from the March 2019 issue of Power Transmission Engineering.
Involute splines are commonly used in gearboxes to connect gears and shafts, especially when high torque is transmitted through the coupling. The load is shared among multiple teeth around the coupling circumference, resulting in higher load capacity than a conventional single key. However, the total load is not equally shared among all spline teeth, mainly because of pitch deviations resulting from the manufacturing process. The load distribution along the spline engagement length is also nonuniform because of tooth misalignments and shaft torsional effects. This paper presents an investigation of the influence of spur gear loads on the load distribution of spline teeth.
Automate Show Examines the Integration of Robotics, Automation and Machine Vision, while Promat explores the latest in material handling technology.
Elastic housing deformation by MESYS, plus new motors, actuators, gear drives and more.
News about new Products in the industry.
Framo Morat and Dunkermotoren Produce Drive Systems for Automatic Guided Vehicles.
Smart Factory solutions hint at machine design potential in 2018.
The complete Product News section from the March 2018 issue of Power Transmission Engineering.
The complete Product News section from the March 2014 issue of Power Transmission Engineering.
After a sluggish 2013, annual installations of new wind turbines grew by 44% in 2014, according to the Global Wind Energy Council. And while much of that growth has been in Asiaâ” particularly China, which now leads the world with 114 GW of installed capacityâ”the USA, Europe, and the rest of the world expect steady growth for the next couple of years as well (Fig. 1).
Hannover Messe 2018 will focus on mobility, integration and collaboration.
One of our goals at Power Transmission Engineering is to help you understand, identify and select the best technology for your mechanical power transmission or motion control applications. With every project, you have to decide which components to use, and which suppliers, based on functionality, quality and price. We aim to help you make those decisions informed by providing the latest information on current technology, especially when it comes to mechanical components.
The complete Industry News section from the October 2019 issue of Power Transmission Engineering.
The complete Product News section from the August 2011 issue of Power Transmission Engineering
The revolution goes by many names: machine-to-machine communication, smart manufacturing and the Industrial Internet, to name a few. In Europe, the prevailing term is Industry 4.0. In Germany, where that phrase was coined, the government is putting down â‚¬200 million to cultivate a lead in the industry. The McKinsey Global Institute estimates that its potential economic impact will be almost $4 trillion (or more) by 2025. Enthusiastic evangelists will tell you that the Industrial Internet is the most important advance in their industries that theyâ™ve seen in their decades-long careers.
We anticipate no substantive improvement in manufacturing activity. Not in the U.S. or internationally. If anything, headwinds may have become slightly more pronounced because a U.S. â” Iran âœdealâ that everybody hates except a) the Iranian government and b) the Obama administration will result in the release of Iranian oil supply back onto the global market. Oil had rallied from about $50 to $60 over the past month (I like round numbers), but has since roundtripped. Expect further, deeper capital spending cuts in the U.S. oil sector to continue affecting demand for large capital equipment.
First quarter results confirmed our view. Capital expenditures are being slashed in the oil sector, the stronger U.S. dollar is enabling Japanese machinery competitors to gain share in the Middle East and Latin America, and lower soft commodity prices translate into a continuing North American decline in demand for farm equipment.
Third-quarter earnings are confirming the worst-case scenario, i.e. â” not only are energy related end markets in a downturn, but conditions continue to worsen.
Third-quarter earnings confirmed the worst-case scenario â” plunging oil prices are whacking almost the entire industrial sector. The theme is hardly new, as the pattern of our headlines has revealed over the past fifteen or so months:
The complete Product News section from the December 2017 issue of Power Transmission Engineering, featuring the latest from SKF, R+W, Brecoflex, Nexen, GÃ¼del, Renold Gears, Hansford Sensors, Ogura Industrial, Igus, Destaco, RÃ¶hm and Iwis.
Our âœBatten Down The Hatchesâ call proved timely as the market sold off by about (10 percent) before staging a partial recovery
âœ[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.â
New products within the Industry
It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.
The complete Product News section from the December 2011 issue of Power Transmission Engineering.
The complete Industry News section from the June 2011 issue of Power Transmission Engineering.
Global economic demand remains solid - even if you couldn't tell by recent third-quarter results and despite all efforts by U.S. politicians of both political parties. Let's go through what happened and what is coming.
Global economic activity remains good -- noise about China slowing, notwithstanding -- and despite the ObamaCare debacle, non-Christmas-related consumer spending looks pretty good. Europe is still Europe and China continues to grow 7-8 percent -- even as the government seeks to clamp down on its own shadow banking system. And India remains a mess.
The complete Product News section from the August 2014 issue of Power Transmission Engineering
Wichita Clutch helps drive storm simulator at the University of Florida.
The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.
The complete Industry News section from the December 2018 issue of Power Transmission Engineering.
This special product news section takes a look at the latest in motion control products.
Maximizing packaging machine productivity and performance is imperative to success and is driving OEMs to adopt and invest in the latest technologies that can meet their customersâ™ challenges. At the forefront of these performance-driven technologies is an integrated control system—or programmable automation controller (PAC)—and latest-generation motion solutions.
The complete Product News section from the August 2010 issue of Power Transmission Engineering.
The latest power transmission videos, articles and updates from online.
Though the original definition of mechatronics derived from the Yasakawa Electric Company in the late 1960s (the company won trademark rights for the term in 1973), the word has remarkably evolved.
The complete Industry News section from the August 2013 issue of Power Transmission Engineering.
The complete Product News section from the December 2012 issue of Power Transmission Engineering.
How to optimize performance and sustainable production through strategic planning, informed analysis and automation and control technology.
The complete Product News section from the February 2010 issue of Power Transmission Engineering.
Sound business model increases opportunities for Misumi USA Inc.
The complete product news section from the June 2008 issue of Power Transmission Engineering.
Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.
The complete product news section from the October 2008 issue of Power Transmission Engineering (PTE).
The complete product news section from the December 2008 issue of Power Transmission Engineering.
Robotics and other advanced automation technology systems are viewed as a looming threat to some in the plant maintenance field. Although there is a constant battle for some workers to remain useful while machines are continuously fulfilling more roles on the plant floor, there are those who in turn have found a better use of their newly freed time.
The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.
A discussion of the basics in DC drives, DC motors, AC drives, AC motors and synchronous motors.