Siemens Offers Webinar on Completing the Digital Twin

Virtual Commissioning enables mechanical, electrical and automation engineers to work in a parallel for efficient validation of control logic, electric behavior, and machine kinematics, before the machine is even built.

Virtual Commissioning enables mechanical, electrical and automation engineers to work in a parallel for efficient validation of control logic, electric behavior, and machine kinematics, before the machine is even built.

January 11, 2021—
Join Siemens for the third 60-minute guided session in the three-part series for how to Get Started with Virtual Commissioning. With a full Automation and Behavior model in place, learn how to complete the Digital Twin by including the Physical and Kinematic model of your machine in the simulation. SIMATIC Machine Simulator of the Totally Integrated Automation (TIA) Portal engineering platform integrates with NX Mechatronics Concept Designer (NX MCD) to validate the entire machine design.

Benefits of attending: 
•Learn the how to complete the Digital Twin for Virtual Commissioning
•Build a Physical and Kinematic model with NX Mechatronics Concept Designer (NX MCD)
•See how machine CAD models from any source can be used to optimize motion, material flow, gravity and collisions
•Realize a fully integrated simulation of Automation, Electrical, and Physical behavior

The webinar takes place January 14, 2021 at 12:00 pm Eastern. Register at the link below:

Siemens Digital Industries Software
URL: 
https://zoom.us/webinar/register/2716058264091/WN_07xJ9RexSOC5VeUyRnVRNA