We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
A new version of the MESYS shaft and rolling bearing analysis software including new functionality is available. The bearing analysis software allows the calculation of the load distribution within the bearing and bearing life according to ISO/TS 16281 and it is integrated in a shaft system calculation with additional possibilities like modal analysis, strength calculation for shafts and interfaces to gear calculations. Currently the software is used by customers in 31 countries on 4 continents. The new version is now available.
Sports fans want to see every little detail, and the TV cameras deliver whether the goalie is clenching his jaw before the spot kick or how many millimeters the serve cleared the net in a tennis match, everything is captured in detail. Images like these are only possible when the camera is up-close and doesn’t interfere with the action. Many major tournaments and Olympic Games use miniature devices, which even fit in a corner flag, from the Wiesbaden-based specialist LMP Lux Media Plan. Drive units from Faulhaber are used to adjust the shutter and focus.
Salim Haffar, deputy general manager at I-MAK, was reelected as president of EUROTRANS in 2022. This is Haffar’s third term in this role. PTE recently caught up with Haffar to discuss the evolution of EUROTRANS, the focus of the International Drive Conference at Hannover Messe and the current state of I-MAK’s gearbox business in Turkey.
In an urgent assignment, a gear has to be designed, with the engineer already knowing the required reduction ratio, torque and speed. On the manufacturing side, the preferred materials, possible qualities and the reference profiles are specified. This initial situation represents an everyday task.
Mechanical engineering theory, design and practice come into play for NYCU Vulpes Racing Team
April 6, 2023
NYCU (National Yang Ming Chia Tung University) Vulpes Racing—founded in 2008—is a Formula Student Team that combines mechanical engineering, industrial design, public relations, video production and marketing expertise.
The New Year’s Ball Drop wouldn’t be possible without a sophisticated electromechanical system that must operate reliably during the most critical 60 seconds of the year.
April 6, 2023
More than a billion people around the world unite to ring in the New Year, their eyes set upon the glittering New Year’s Ball in Manhattan. Thousands are gathered at Times Square — the famed “Bow Tie” of Midtown — braving the December cold and peering through glasses with numerically shaped frames. Millions more tune in from their various screens at home. With so much riding on its descent, the Ball, along with the mechanical and electrical systems responsible for its operation, must operate like clockwork.
This study presents a simulation method for considering complex wheel bodies in an analytical tooth contact model. The wheel body is considered using reduced FE stiffness. Reduction points are defined over the width and linked with the analytical gear.
For cylindrical wheel bodies, comparative calculations show fewer deviations from the expected results with the new method. This is due to the additional degrees of freedom in the FEM model. In the calculation with cylindrical wheel bodies, bending due to axial force in tooth contact could also be verified in addition to the deformation in tooth contact and the influence of the shaft-bearing system.
Today, gearboxes are inevitable in numerous applications requiring high power density including wind turbines, electric vehicles, cranes, robotics, etc. A combination of high-ratio gearboxes with high-speed, low-torque motors is often used to achieve high power density. Planetary gear trains (PGTs) help achieve a high gear ratio in a compact arrangement. Several configurations of planetary gears are widely studied in this article where the gear profiles used in these studies are primarily involute.
Harmonic Drive announces the release of its HPF series of hollow shaft gear units. Designed for heavy-duty industrial applications, these advanced gear units offer high torque outputs and flexible installation options, making them ideal for use in demanding environments.