Power Transmission Technology Update       May 17, 2016
Private Treaty - Closure of Alinta Power Station

Private Treaty - Closure of Alinta Power Station

Featuring:

  • 780 MW Combined Output
  • Mitsubishi 275 MW Electric Turbines (1982), (qty 2)
  • Phi engineering Coal Pulverisers (1981), (qty 12)
  • Boiler Feed Pumps (qty 4)
  • Induced Draft Fans (qty 4)
  • Champion VOC160 Plant Compressors (qty 2)
  • Caterpillar 600kw Standby Generators (qty 2)
  • Maxitherm 10 MW Auxiliary and more
Location of assets: Port Augusta – South Australia. Viewing: By Appointment Only If you have any questions, please contact: GREG CENITI or CUSTOMER SERVICE

Read More
Gear & Spline Machining: Reducing Risk of Failure

Gear & Spline Machining: Reducing Risk of Failure

Finding a competent and experienced manufacturer able to handle any type of gear or spline machining can be difficult. Finding one who can then back up their services with high quality defined by inspection charting and ISO quality systems is even harder. Find out where engineers and buyers have had success in this search.

Read More

Swap Metal Components for Maintenance-Free Plastic

Swap Metal Components for Maintenance-Free Plastic

Many times plastic components are seen as inferior, but often they are the best and most economical option for an application. SDP/SI offers high-quality molded and machined gears, gear racks, pulleys, roller chain, sprockets, couplings, bearings, and more. For lightweight and maintenance-free options in your design visit SDP/SI.

Read More


Bevel Gear Supplier

Bevel Gear Supplier

B&R Machine and Gear Corporation is a full service manufacturing facility with a focus in bevel gearing. Specializing in larger diameters and small batch production, we provide turn-key parts for your project or repair. Click here for more information regarding our services and machining capabilities!

Read More


 Gear/Pulley/Sprocket/Shaft – One Piece Construction

Gear/Pulley/Sprocket/Shaft – One Piece Construction

One-piece construction has a number of advantages. The labor cost for assembly is eliminated, less machining time and fewer set ups. The integrity of the part is increased and the weight possibly reduced. Nordex Engineers are available to re-design or reverse engineer an assembly and make it cost effective and efficient.

Read More

Now 50% Quieter: Schaeffler Deep Groove Ball Bearings

Now 50% Quieter: Schaeffler Deep Groove Ball Bearings

Schaeffler’s Generation C Deep Groove Ball Bearings are 50% quieter than before, thanks to narrower cage pocket tolerances, higher ball accuracy, and improved raceway surfaces. Optimized bearing kinematics reduce friction by up to 35%. Add an available low-friction polyamide cage and our innovative HRS seal, and you’ve got the new standard for energy-efficient, low-noise bearings!

Read More


Quality Products. Right Price. Right Now.

Quality Products. Right Price. Right Now.

IDC Select motors® are UL & CSA rated. They are manufactured in ISO 9001 facilities using a state-of-the-art vacuum pressure impregnation (VPI) design process that completely seals the windings against moisture and vibration. This provides greater mechanical strength and improved corona protection resulting in the ultimate quality and electrical performance. Find a local IDC distributor near you.

Read More

Innovative Way to Take Up Tolerances!

Innovative Way to Take Up Tolerances!

Smalley Linear Springs are a continuous wave formed (marcelled) wire length produced from spring tempered materials. They act as a load bearing device having approximately the same load/deflection characteristics as a wave spring. Linear Springs are now available as a standard part in carbon and stainless steel, with over 200 sizes.

Read More

High Performance Spiral Bevel Gearbox

High Performance Spiral Bevel Gearbox

With more models, sizes, and ratios, DieQua's spiral bevel gearboxes offer precision, performance and durability far above standard products. They're ideal for applications requiring high speed, precise motion control, high torque, or heavy shocks. Several configurations, options, and customized solutions provide unmatched design versatility...

Read More


Couplings Highly Effective At Dampening System Vibration

Couplings Highly Effective At Dampening System Vibration

Designed with an effective pin and bushing connection that minimizes vibration, Miki Pulley CPU couplings handle angular misalignment of 4 degrees and parallel misalignment of 0.5 mm. Unique design maintains zero backlash for smooth system operation. Aluminum construction capable of absorbing and dissipating heat. Clamp style hubs slip easily onto two connecting shafts.

Read More

Parker Releases PM-DD Servomotor for High Torque and High Accuracy

Parker Releases PM-DD Servomotor for High Torque and High Accuracy

The new Parker PM-DD servomotor is designed to provide high torque and high accuracy. Tapped mounting holes and a hollow through bore allow this robust motor to be used in a variety of applications that require the load to be attached directly to the motor.

Read More

Amacoil Uhing Shaft Collars Provide Non-Slip Holding of Tools

Amacoil Uhing Shaft Collars Provide Non-Slip Holding of Tools

Easylock shaft collars, from Amacoil/Uhing, install quickly without special tools to provide non-slip holding of tools and reels on smooth, case hardened (Rockwell > 55) shafts. A new option – Easylock positive release – assures the collars won’t become jammed on shafts.

Read More

To advertise in this newsletter, please call Dave Friedman at (847) 437-6604 or e-mail dave@powertransmission.com.

You received this email because you are a subscriber to Power Transmission Engineering magazine, or you've registered to receive our e-mails at https://www.powertransmission.com. If you'd like, you can unsubscribe

Power Transmission Engineering® and the Power Transmission Engineering e-mail newsletter and Product Alert are
© Randall Publications LLC, 1840 Jarvis Ave., Elk Grove Village, IL 60007 USA
Visit us at https://www.powertransmission.com marker1 marker2