
FKM High Temp High Performance Radial Lip Seals
Best Parts Online is introducing a line of high performance radial lip seals for rotary shafts made with premium FKM material. Stocked sizes to fit shafts from 10mm to 250mm. BPO sources from best-in-class manufacturers and stocks thousands of different oil and grease seals in our 80,000 sq ft warehouse in California.
Read More |
C Series Carbon Steel Rod Ends
For a traditional carbon steel two-piece rod end, QA1 offers its C Carbon Steel Series rod ends. These metal to metal rod ends are protective coated for corrosion resistance and are available in both metric and inch dimensions with left and right hand threads in male and female styles. The C Series is also available with a PTFE liner. Grease fittings and stud configurations are available.
Read More |
Intelligent Servo Motor Size Reduced 25%
Meeting customer requirements for smaller size, higher power density intelligent servo motors, Dunkermotor has shortened its iBLDC™ (Intelligent Brushless DC) motors with integral 4-quadrant speed controls in the 45mm frame size by 25%, maintaining the same power and torque capabilities and motor efficiencies.
Read More |
DARALI Cycloidal Drive Offers Superior Performance And Quick Delivery
Backed by ISO-9002 certified manufacturing, DARALI Cycloidal Drive has the unique advantage of high efficiency, compactness, simple maintenance and 500% shock load capacity.
Unlike conventional gear mechanisms, the torque transmission components of cycloidal reducers undergo COMPRESSION contact...
Read More |
Crankshaft Hardening and Tempering
Inductoheat's, CrankPro® crankshaft hardening and tempering systems utilize patented technology, SharP-C™ which eliminates the rotation of the crankshaft and movement
of the inductor during heating and quenching cycles. This stationary heating method provides several practical and technical benefits; reduced floor space, simple operation, robust machined coils, virtually no part distortion, high surface compressive stresses and minimal part growth.
Read More |

It's Your Green World. We Help Move It.
High quality and unique gears up to 2 meters in diameter. State-of-the-art ecological and lean processes. Gear production completely vertically integrated, including heat-treatment. Micro corrected gears for lifetime over 25 years, higher efficiency, lower noise and vibration.
Read More |
Applied Process Inc. makes bigger parts, better.
Only Applied Process has the furnace - and the finesse - to produce austempered iron and steel parts that weigh in excess of 10 tons. Parts that are stronger, lighter, quieter, more wear resistant. Parts that contribute to more energy efficient operations in countless applications and increase performance while decreasing overall cost of production. Visit us online at
www.appliedprocess.com. |
Try a Retaining Ring or Wave Spring Free
Smalley offers free samples of standard parts to test in your application. 6,000 Spirolox® Retaining Rings and Wave Springs are available in stock, from ¼" to 16", in carbon and stainless steel. Spirolox Retaining Rings have No Ears To Interfere™ with mating components. Wave Springs reduce springs heights by up to 50%.
Read More |
Bellows Couplings Offer Accuracy and Repeatability
Bellows couplings from Ruland Manufacturing offer a high degree of accuracy and repeatability for renewable solar energy applications including test and measurement, wafer handling, panel processing, and vision systems for PV and CPV cell, panel, and thin-film production equipment.
Read More |